lkml.org 
[lkml]   [2023]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [Patch] cpufreq: tegra194: fix warning due to missing opp_put
From


On 29/08/23 11:29, Viresh Kumar wrote:
> External email: Use caution opening links or attachments
>
>
> On 28-08-23, 17:39, Sumit Gupta wrote:
>> Fix the warning due to missing dev_pm_opp_put() call and hence
>> wrong refcount value. This causes below warning message when
>> trying to remove the module.
>>
>> Call trace:
>> dev_pm_opp_put_opp_table+0x154/0x15c
>> dev_pm_opp_remove_table+0x34/0xa0
>> _dev_pm_opp_cpumask_remove_table+0x7c/0xbc
>> dev_pm_opp_of_cpumask_remove_table+0x10/0x18
>> tegra194_cpufreq_exit+0x24/0x34 [tegra194_cpufreq]
>> cpufreq_remove_dev+0xa8/0xf8
>> subsys_interface_unregister+0x90/0xe8
>> cpufreq_unregister_driver+0x54/0x9c
>> tegra194_cpufreq_remove+0x18/0x2c [tegra194_cpufreq]
>> platform_remove+0x24/0x74
>> device_remove+0x48/0x78
>> device_release_driver_internal+0xc8/0x160
>> driver_detach+0x4c/0x90
>> bus_remove_driver+0x68/0xb8
>> driver_unregister+0x2c/0x58
>> platform_driver_unregister+0x10/0x18
>> tegra194_ccplex_driver_exit+0x14/0x1e0 [tegra194_cpufreq]
>> __arm64_sys_delete_module+0x184/0x270
>>
>> Fixes: f41e1442ac5b ("cpufreq: tegra194: add OPP support and set bandwidth")
>> Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
>> ---
>> drivers/cpufreq/tegra194-cpufreq.c | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/cpufreq/tegra194-cpufreq.c b/drivers/cpufreq/tegra194-cpufreq.c
>> index 88ef5e57ccd0..f63f7a6c2034 100644
>> --- a/drivers/cpufreq/tegra194-cpufreq.c
>> +++ b/drivers/cpufreq/tegra194-cpufreq.c
>> @@ -454,6 +454,8 @@ static int tegra_cpufreq_init_cpufreq_table(struct cpufreq_policy *policy,
>
> You need to put the OPP here, even if this fails.
>

Sent v2 with the change. Thank you for pointing.

Regards,
Sumit Gupta

>> if (ret < 0)
>> return ret;
>>
>> + dev_pm_opp_put(opp);
>> +
>> freq_table[j].driver_data = pos->driver_data;
>> freq_table[j].frequency = pos->frequency;
>> j++;
>> --
>> 2.17.1
>
> --
> viresh

\
 
 \ /
  Last update: 2023-08-29 10:47    [W:0.139 / U:1.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site