lkml.org 
[lkml]   [2023]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v3 11/28] dt-bindings: usb: dwc3: Add snps,num-hc-interrupters definition
From


On 8/29/2023 12:42 AM, Krzysztof Kozlowski wrote:
> On 29/08/2023 09:19, Wesley Cheng wrote:
>>>>
>>>> This is a XHCI feature, but the DWC3 design is built in a way that DWC3
>>>> host initializes the XHCI device and populates the properties associated
>>>> to XHCI dev.
>>>
>>> You speak about driver now, not bindings. If driver has limitations,
>>> change it. Not really problem of bindings.
>>>
>>
>> Its the limitation of the HW. Depending on how the SNPS DWC3 controller
>> was implemented the vendor it can support less than the value mentioned
>> in the Synopsys databook.
>
> Then what is "XHCI dev"? A Linux device? Then a driver topic. What is
> "populates the properties" - what or whose properties? Of Linux device?
> Then a driver topic...
>

I will reword it to using XHCI host controller versus using terms like
device and properties for the next rev.

Thanks
Wesley Cheng

\
 
 \ /
  Last update: 2023-08-29 09:53    [W:0.105 / U:1.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site