lkml.org 
[lkml]   [2023]   [Aug]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/6] pinctrl: sprd: Fix the incorrect mask and shift definition
Date
From: Linhua Xu <Linhua.Xu@unisoc.com>

Pull-up and pull-down are mutually exclusive. When setting one of them,
the bit of the other needs to be clear. Now, there are cases where pull-up
and pull-down are set at the same time in the code, thus fix them.

Signed-off-by: Linhua Xu <Linhua.Xu@unisoc.com>
---
drivers/pinctrl/sprd/pinctrl-sprd.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/pinctrl/sprd/pinctrl-sprd.c b/drivers/pinctrl/sprd/pinctrl-sprd.c
index 4ee030d723c4..6464999aaebe 100644
--- a/drivers/pinctrl/sprd/pinctrl-sprd.c
+++ b/drivers/pinctrl/sprd/pinctrl-sprd.c
@@ -58,21 +58,21 @@
#define DRIVE_STRENGTH_SHIFT 19

#define SLEEP_PULL_DOWN BIT(2)
-#define SLEEP_PULL_DOWN_MASK 0x1
+#define SLEEP_PULL_DOWN_MASK 0x3
#define SLEEP_PULL_DOWN_SHIFT 2

#define PULL_DOWN BIT(6)
-#define PULL_DOWN_MASK 0x1
+#define PULL_DOWN_MASK 0x3
#define PULL_DOWN_SHIFT 6

#define SLEEP_PULL_UP BIT(3)
-#define SLEEP_PULL_UP_MASK 0x1
-#define SLEEP_PULL_UP_SHIFT 3
+#define SLEEP_PULL_UP_MASK 0x3
+#define SLEEP_PULL_UP_SHIFT 2

#define PULL_UP_4_7K (BIT(12) | BIT(7))
#define PULL_UP_20K BIT(7)
-#define PULL_UP_MASK 0x21
-#define PULL_UP_SHIFT 7
+#define PULL_UP_MASK 0x43
+#define PULL_UP_SHIFT 6

#define INPUT_SCHMITT BIT(11)
#define INPUT_SCHMITT_MASK 0x1
--
2.17.1
\
 
 \ /
  Last update: 2023-08-25 05:40    [W:0.111 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site