lkml.org 
[lkml]   [2023]   [Aug]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v5 1/3] dt-bindings: pwm: Add binding for Allwinner D1/T113-S3/R329 PWM controller
From
Hi,

On 23/08/2023 07:57, Александр Шубин wrote:
> Hi Andre,
>
> вт, 22 авг. 2023 г. в 12:49, Andre Przywara <andre.przywara@arm.com>:
>>
>> On Mon, 14 Aug 2023 16:32:16 +0300
>> Aleksandr Shubin <privatesub2@gmail.com> wrote:
>>
>> Hi Aleksandr,
>>
>>> Allwinner's D1, T113-S3 and R329 SoCs have a new pwm
>>> controller witch is different from the previous pwm-sun4i.
>>>
>>> The D1 and T113 are identical in terms of peripherals,
>>> they differ only in the architecture of the CPU core, and
>>> even share the majority of their DT. Because of that,
>>> using the same compatible makes sense.
>>> The R329 is a different SoC though, and should have
>>> a different compatible string added, especially as there
>>> is a difference in the number of channels.
>>>
>>> D1 and T113s SoCs have one PWM controller with 8 channels.
>>> R329 SoC has two PWM controllers in both power domains, one of
>>> them has 9 channels (CPUX one) and the other has 6 (CPUS one).
>>>
>>> Add a device tree binding for them.
>>>
>>> Signed-off-by: Aleksandr Shubin <privatesub2@gmail.com>
>>> ---
>>> .../bindings/pwm/allwinner,sun20i-pwm.yaml | 85 +++++++++++++++++++
>>> 1 file changed, 85 insertions(+)
>>> create mode 100644 Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml
>>>
>>> diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml
>>> new file mode 100644
>>> index 000000000000..9512d4bed322
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml
>>> @@ -0,0 +1,85 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/pwm/allwinner,sun20i-pwm.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Allwinner D1, T113-S3 and R329 PWM
>>> +
>>> +maintainers:
>>> + - Aleksandr Shubin <privatesub2@gmail.com>
>>> +
>>> +properties:
>>> + compatible:
>>> + oneOf:
>>> + - const: allwinner,sun20i-d1-pwm
>>> + - items:
>>> + - const: allwinner,sun20i-r329-pwm
>>> + - const: allwinner,sun20i-d1-pwm
>>> +
>>> + reg:
>>> + maxItems: 1
>>> +
>>> + "#pwm-cells":
>>> + const: 3
>>> +
>>> + clocks:
>>> + items:
>>> + - description: 24 MHz oscillator
>>> + - description: Bus Clock
>>
>> The manual tells me that the new PWMs can also use APB0 as the
>> input clock, which (finally!) allows PWM frequencies above 24 MHz.
>> So we should have an explicit reference to that clock - even if the bus
>> clock happens to be gated version of APB0.
>
> Should I change it to something like this:
> pwm: pwm@2000c00 {
> compatible = "allwinner,sun20i-d1-pwm";
> reg = <0x02000c00 0x400>;
> clocks = <&ccu CLK_BUS_PWM>, <&dcxo>, <&ccu CLK_APB0>;
> clock-names = "bus", "hosc", "apb0";
> resets = <&ccu RST_BUS_PWM>;
> #pwm-cells = <0x3>;
> };

Yes, that is what I had in mind!
It shouldn't be too hard to add support for this in the driver as well.

Thanks!
Andre

>
>>
>> Cheers,
>> Andre
>>
>>> +
>>> + clock-names:
>>> + items:
>>> + - const: hosc
>>> + - const: bus
>>> +
>>> + resets:
>>> + maxItems: 1
>>> +
>>> + allwinner,pwm-channels:
>>> + $ref: /schemas/types.yaml#/definitions/uint32
>>> + description: The number of PWM channels configured for this instance
>>> + enum: [6, 9]
>>> +
>>> +allOf:
>>> + - $ref: pwm.yaml#
>>> +
>>> + - if:
>>> + properties:
>>> + compatible:
>>> + contains:
>>> + const: allwinner,sun20i-r329-pwm
>>> +
>>> + then:
>>> + required:
>>> + - allwinner,pwm-channels
>>> +
>>> + else:
>>> + properties:
>>> + allwinner,pwm-channels: false
>>> +
>>> +unevaluatedProperties: false
>>> +
>>> +required:
>>> + - compatible
>>> + - reg
>>> + - "#pwm-cells"
>>> + - clocks
>>> + - clock-names
>>> + - resets
>>> +
>>> +examples:
>>> + - |
>>> + #include <dt-bindings/clock/sun20i-d1-ccu.h>
>>> + #include <dt-bindings/reset/sun20i-d1-ccu.h>
>>> +
>>> + pwm: pwm@2000c00 {
>>> + compatible = "allwinner,sun20i-d1-pwm";
>>> + reg = <0x02000c00 0x400>;
>>> + clocks = <&dcxo>, <&ccu CLK_BUS_PWM>;
>>> + clock-names = "hosc", "bus";
>>> + resets = <&ccu RST_BUS_PWM>;
>>> + #pwm-cells = <0x3>;
>>> + };
>>> +
>>> +...
>>
>
> Cheers,
> Aleksandr
>

\
 
 \ /
  Last update: 2023-08-23 13:50    [W:0.101 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site