lkml.org 
[lkml]   [2023]   [Aug]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [RFC PATCH 1/1] soc: qcom: Add driver to read secondary bootloader (XBL) log
From
Hi Bryan,

On 8/22/2023 6:13 PM, Bryan O'Donoghue wrote:
> On 22/08/2023 13:15, Ninad Naik wrote:
>> Qualcomm secondary bootloader (XBL) boot log holds information to
>> identify various firmware configuration currently set on the SoC.
>> The XBL log is stored in a predefined reserved memory region.
>>
>> This drivers provides a way to print XBL logs on the console. To
>> do so, it provides a debugfs entry which captures the logs stored
>> in this reserved memory region. This entry can now be used to read
>> and print the XBL logs to console.
>>
>> User can use the below command to print XBL log to console:
>>          cat /sys/kernel/debug/xbl_log
>>
>> Signed-off-by: Ninad Naik <quic_ninanaik@quicinc.com>
>> ---
>>   drivers/soc/qcom/Kconfig        |  13 +++
>>   drivers/soc/qcom/Makefile       |   1 +
>>   drivers/soc/qcom/dump_xbl_log.c | 139 ++++++++++++++++++++++++++++++++
>>   3 files changed, 153 insertions(+)
>>   create mode 100644 drivers/soc/qcom/dump_xbl_log.c
>>
>> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
>> index 715348869d04..4489d37e924d 100644
>> --- a/drivers/soc/qcom/Kconfig
>> +++ b/drivers/soc/qcom/Kconfig
>> @@ -291,4 +291,17 @@ config QCOM_INLINE_CRYPTO_ENGINE
>>       tristate
>>       select QCOM_SCM
>> +config QCOM_DUMP_XBL_LOG
>> +    tristate "Qualcomm driver to print XBL logs on console from debugfs"
>> +    help
>> +      This driver is used to capture secondary bootloader (xbl) log
>> +      from a reserved memory region and provide a debugfs entry to read
>> +      logs captured from this memory region and print them on console.
>> +      User can use below command to print the xbl log on console:
>> +
>> +                cat /sys/kernel/debug/xbl_log
>> +
>> +      These logs help to identify firmware configuration information on
>> +      the SoC. The name of the built module will be dump_xbl_log
>> +
>>   endmenu
>> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
>> index bbca2e1e55bb..aac088a1a0b6 100644
>> --- a/drivers/soc/qcom/Makefile
>> +++ b/drivers/soc/qcom/Makefile
>> @@ -32,3 +32,4 @@ obj-$(CONFIG_QCOM_KRYO_L2_ACCESSORS) +=
>> kryo-l2-accessors.o
>>   obj-$(CONFIG_QCOM_ICC_BWMON)    += icc-bwmon.o
>>   qcom_ice-objs            += ice.o
>>   obj-$(CONFIG_QCOM_INLINE_CRYPTO_ENGINE)    += qcom_ice.o
>> +obj-$(CONFIG_QCOM_DUMP_XBL_LOG)    += dump_xbl_log.o
>> diff --git a/drivers/soc/qcom/dump_xbl_log.c
>> b/drivers/soc/qcom/dump_xbl_log.c
>> new file mode 100644
>> index 000000000000..ea335a5e660b
>> --- /dev/null
>> +++ b/drivers/soc/qcom/dump_xbl_log.c
>> @@ -0,0 +1,139 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2021, The Linux Foundation. All rights reserved.
>> + */
>
> 2023
>
>> +
>> +#include <linux/init.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/device.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/memblock.h>
>> +#include <linux/of_address.h>
>> +#include <linux/err.h>
>> +#include <linux/debugfs.h>
>
> It would be nice to alphetise this include list.
>
Ack. Sure, I'll make this fix. Thank you.
>> +struct xbl_log_data {
>> +    struct device *dev;
>> +    size_t buf_size;
>> +    void __iomem *xbl_buf;
>> +    struct dentry *dbg_file;
>> +    struct debugfs_blob_wrapper dbg_data;
>> +};
>> +
>> +static int map_addr_range(struct device_node **parent, const char *name,
>> +              struct xbl_log_data *xbl_data)
>> +{
>> +    struct device_node *node;
>> +    struct resource res;
>> +    int ret;
>> +
>> +    node = of_find_node_by_name(*parent, name);
>> +    if (!node)
>> +        return -ENODEV;
>> +
>> +    ret = of_address_to_resource(node, 0, &res);
>> +    if (ret) {
>> +        dev_err(xbl_data->dev, "Failed to parse memory region\n");
>> +        return ret;
>> +    }
>> +    of_node_put(node);
>> +
>> +    if (!resource_size(&res)) {
>> +        dev_err(xbl_data->dev, "Failed to parse memory region size\n");
>> +        return -ENODEV;
>> +    }
>> +
>> +    xbl_data->buf_size = resource_size(&res) - 1;
>> +    xbl_data->xbl_buf = devm_memremap(xbl_data->dev, res.start,
>> +                      xbl_data->buf_size, MEMREMAP_WB);
>> +    if (!xbl_data->xbl_buf) {
>> +        dev_err(xbl_data->dev, "%s: memory remap failed\n", name);
>> +        return -ENOMEM;
>> +    }
>> +
>> +    return 0;
>> +}
>> +
>> +static int xbl_log_probe(struct platform_device *pdev)
>> +{
>> +    struct device *dev = &pdev->dev;
>> +    struct xbl_log_data *xbl_data;
>> +    struct device_node *parent;
>> +    int ret;
>> +
>> +    xbl_data = devm_kzalloc(dev, sizeof(*xbl_data), GFP_KERNEL);
>> +    if (!xbl_data)
>> +        return -ENOMEM;
>> +
>> +    xbl_data->dev = &pdev->dev;
>> +    platform_set_drvdata(pdev, xbl_data);
>> +
>> +    parent = of_find_node_by_path("/reserved-memory");
>> +    if (!parent) {
>> +        dev_err(xbl_data->dev, "reserved-memory node missing\n");
>> +        return -ENODEV;
>> +    }
>> +
>> +    ret = map_addr_range(&parent, "uefi-log", xbl_data);
>> +    if (ret)
>> +        goto put_node;
>> +
>> +    xbl_data->dbg_data.data = xbl_data->xbl_buf;
>> +    xbl_data->dbg_data.size = xbl_data->buf_size;
>> +    xbl_data->dbg_file = debugfs_create_blob("xbl_log", 0400, NULL,
>> +                         &xbl_data->dbg_data);
>> +    if (IS_ERR(xbl_data->dbg_file)) {
>> +        dev_err(xbl_data->dev, "failed to create debugfs entry\n");
>> +        ret = PTR_ERR(xbl_data->dbg_file);
>> +    }
>> +
>> +put_node:
>> +    of_node_put(parent);
>> +    return ret;
>> +}
>> +
>> +static int xbl_log_remove(struct platform_device *pdev)
>> +{
>> +    struct xbl_log_data *xbl_data = platform_get_drvdata(pdev);
>> +
>> +    debugfs_remove_recursive(xbl_data->dbg_file);
>> +    return 0;
>> +}
>> +
>> +static struct platform_driver xbl_log_driver = {
>> +    .probe = xbl_log_probe,
>> +    .remove = xbl_log_remove,
>> +    .driver = {
>> +           .name = "xbl-log",
>> +           },
> Is that indentation correct ?
>
No, the closing parenthesis should be fixed. Will correct this, thank you.

>> +};
>> +
>> +static struct platform_device xbl_log_device = {
>> +    .name = "xbl-log",
>> +};
>> +
>> +static int __init xbl_log_init(void)
>> +{
>> +    int ret = 0;
>> +
>> +    ret = platform_driver_register(&xbl_log_driver);
>> +    if (!ret) {
>> +        ret = platform_device_register(&xbl_log_device);
>> +        if (ret)
>> +            platform_driver_unregister(&xbl_log_driver);
>> +    }
>> +    return ret;
>> +}
>> +
>> +static void __exit xbl_log_exit(void)
>> +{
>> +    platform_device_unregister(&xbl_log_device);
>> +    platform_driver_unregister(&xbl_log_driver);
>> +}
>> +
>> +module_init(xbl_log_init);
>> +module_exit(xbl_log_exit);
>> +
>> +MODULE_DESCRIPTION("Qualcomm Technologies, Inc. (QTI) XBL log driver");
>> +MODULE_LICENSE("GPL");
>
> ---
> bod
Thanks,
Ninad

\
 
 \ /
  Last update: 2023-08-23 13:09    [W:0.168 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site