Messages in this thread | | | From | Rob Herring <> | Subject | Re: [PATCH v5 01/11] dt-bindings: arm: fsl: add imx-se-fw binding doc | Date | Wed, 23 Aug 2023 03:28:31 -0500 |
| |
On Wed, 23 Aug 2023 13:03:20 +0530, Pankaj Gupta wrote: > The NXP's i.MX EdgeLock Enclave, a HW IP creating an embedded > secure enclave within the SoC boundary to enable features like > - HSM > - SHE > - V2X > > Communicates via message unit with linux kernel. This driver > is enables communication ensuring well defined message sequence > protocol between Application Core and enclave's firmware. > > Driver configures multiple misc-device on the MU, for multiple > user-space applications can communicate on single MU. > > It exists on some i.MX processors. e.g. i.MX8ULP, i.MX93 etc. > > Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com> > --- > .../bindings/firmware/fsl,imx-se-fw.yaml | 121 ++++++++++++++++++ > 1 file changed, 121 insertions(+) > create mode 100644 Documentation/devicetree/bindings/firmware/fsl,imx-se-fw.yaml >
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/firmware/fsl,imx-se-fw.example.dtb: se-fw: 'mu-id' is a required property from schema $id: http://devicetree.org/schemas/firmware/fsl,imx-se-fw.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/firmware/fsl,imx-se-fw.example.dtb: se-fw: 'fsl,mu-id' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/firmware/fsl,imx-se-fw.yaml#
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230823073330.1712721-2-pankaj.gupta@nxp.com
The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
| |