lkml.org 
[lkml]   [2023]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 7/8] arm64: dts: qcom: sdx75: Add rpmhpd node
From

On 8/2/2023 6:18 PM, Konrad Dybcio wrote:
> On 2.08.2023 11:59, Rohit Agarwal wrote:
>> Add rpmhpd node and opps for this node to the SDX75 dts.
>>
>> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
>> ---
>> arch/arm64/boot/dts/qcom/sdx75.dtsi | 51 +++++++++++++++++++++++++++++++++++++
>> 1 file changed, 51 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi
>> index 5e9602cd..3a1d37a 100644
>> --- a/arch/arm64/boot/dts/qcom/sdx75.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi
>> @@ -9,6 +9,7 @@
>> #include <dt-bindings/clock/qcom,rpmh.h>
>> #include <dt-bindings/clock/qcom,sdx75-gcc.h>
>> #include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/power/qcom,rpmhpd.h>
>> #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>>
>> / {
>> @@ -666,6 +667,56 @@
>> clock-names = "xo";
>> #clock-cells = <1>;
>> };
>> +
>> + rpmhpd: power-controller {
>> + compatible = "qcom,sdx75-rpmhpd";
>> + #power-domain-cells = <1>;
>> + operating-points-v2 = <&rpmhpd_opp_table>;
>> +
>> + rpmhpd_opp_table: opp-table {
>> + compatible = "operating-points-v2";
>> +
>> + rpmhpd_opp_ret: opp1 {
> Please use opp-(value-of-opp-level) here, we've hit a few cases
> where introducing levels inbetween was necessary and this would
> limit the diff if that was the case again, so opp-16 etc.
Will update this as well

Thanks,
Rohit.
>
> Konrad

\
 
 \ /
  Last update: 2023-08-02 15:18    [W:0.084 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site