lkml.org 
[lkml]   [2023]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH v13 03/10] dt-bindings: opp: v2-qcom-level: Document CPR3 open/closed loop volt adjustment
CPR3 and newer can be fed per-OPP voltage adjustment values for both
open- and closed-loop paths to make better decisions about settling
on the final voltage offset target. Document these properties.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
.../devicetree/bindings/opp/opp-v2-qcom-level.yaml | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml b/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
index a30ef93213c0..b203ea01b17a 100644
--- a/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
+++ b/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
@@ -34,6 +34,20 @@ patternProperties:
minItems: 1
maxItems: 2

+ qcom,opp-cloop-vadj:
+ description: |
+ An array of per-thread values representing the closed-loop
+ voltage adjustment value associated with this OPP node.
+ $ref: /schemas/types.yaml#/definitions/int32-array
+ maxItems: 2
+
+ qcom,opp-oloop-vadj:
+ description: |
+ An array of per-thread values representing the open-loop
+ voltage adjustment value associated with this OPP node.
+ $ref: /schemas/types.yaml#/definitions/int32-array
+ maxItems: 2
+
required:
- opp-level
- qcom,opp-fuse-level
--
2.41.0

\
 
 \ /
  Last update: 2023-08-02 14:39    [W:0.098 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site