Messages in this thread | | | Date | Wed, 2 Aug 2023 07:50:39 +0300 | Subject | Re: [PATCH] ARM: dts: at91: ksz9477_evb: Add tx-internal-delay-ps property for port5 | From | claudiu beznea <> |
| |
On 27.07.2023 11:06, Lukasz Majewski wrote: > Without this change the KSZ9477 Evaluation board's Linux (v6.5-rc1) shows > following device warning: > > 'ksz-switch spi1.0: Port 5 interpreting RGMII delay settings based on "phy-mode" property, please update device tree to specify "rx-internal-delay-ps" and "tx-internal-delay-ps"' > > This is not critical, as KSZ driver by itself assigns default value of > tx delay to 2000 ps (as 'rgmii-txid' is set as PHY mode). > > However, to avoid extra warnings in logs - the missing 'tx-internal-delay-ps' > has been specified with the default value of 2000 ps. > > Signed-off-by: Lukasz Majewski <lukma@denx.de>
Applied to at91-dt, thanks!
| |