lkml.org 
[lkml]   [2023]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v4 1/4] clk: qcom: branch: Add clk_branch2_mdio_ops
From


On 8/18/2023 11:29 AM, Bjorn Andersson wrote:
> On Tue, Aug 15, 2023 at 04:52:02PM +0800, Luo Jie wrote:
>> Add the clk_branch2_mdio_ops for supporting clock controller
>> where the hardware register is accessed by MDIO bus, and the
>> spin clock can't be used because of sleep during the MDIO
>
> spin clock?
>
> I believe you're trying to say that the underlying access to the MDIO
> bus can not be done in non-sleepable context and we can therefor not use
> enable/disable to operate it?

Hi Bjorn,
Thanks for the review comments.
yes, the MDIO operation can't be done in non-sleepable context, and
enable/disable clock is using spin lock, so i enable the clock in
.prepare ops.

will fix this typo"spin clock" to "spin lock"

>
>> operation.
>>
>> The clock is enabled by the .prepare instead of .enable when
>> the clk_branch2_mdio_ops is used.
>>
>> Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
>> ---
>> drivers/clk/qcom/clk-branch.c | 7 +++++++
>> drivers/clk/qcom/clk-branch.h | 1 +
>> 2 files changed, 8 insertions(+)
>>
>> diff --git a/drivers/clk/qcom/clk-branch.c b/drivers/clk/qcom/clk-branch.c
>> index fc4735f74f0f..5e08c026ca4a 100644
>> --- a/drivers/clk/qcom/clk-branch.c
>> +++ b/drivers/clk/qcom/clk-branch.c
>> @@ -153,3 +153,10 @@ const struct clk_ops clk_branch_simple_ops = {
>> .is_enabled = clk_is_enabled_regmap,
>> };
>> EXPORT_SYMBOL_GPL(clk_branch_simple_ops);
>> +
>> +const struct clk_ops clk_branch2_mdio_ops = {
>> + .prepare = clk_branch2_enable,
>> + .unprepare = clk_branch2_disable,
>
> I see none of the clocks specify halt_check, which would imply that
> these two calls just turns into clk_enable_regmap() and
> clk_disable_regmap().
>
> So, isn't this then equivalent to clk_branch_simple_ops?
>
> Regards,
> Bjorn
>

Thanks Bjorn for pointing this, i will add the the halt_check in the
next patch set, halt_check is applicable.

>> + .is_prepared = clk_is_enabled_regmap,
>> +};
>> +EXPORT_SYMBOL_GPL(clk_branch2_mdio_ops);
>> diff --git a/drivers/clk/qcom/clk-branch.h b/drivers/clk/qcom/clk-branch.h
>> index 0cf800b9d08d..4b006e8eec5e 100644
>> --- a/drivers/clk/qcom/clk-branch.h
>> +++ b/drivers/clk/qcom/clk-branch.h
>> @@ -85,6 +85,7 @@ extern const struct clk_ops clk_branch_ops;
>> extern const struct clk_ops clk_branch2_ops;
>> extern const struct clk_ops clk_branch_simple_ops;
>> extern const struct clk_ops clk_branch2_aon_ops;
>> +extern const struct clk_ops clk_branch2_mdio_ops;
>>
>> #define to_clk_branch(_hw) \
>> container_of(to_clk_regmap(_hw), struct clk_branch, clkr)
>> --
>> 2.17.1
>>

\
 
 \ /
  Last update: 2023-08-18 10:22    [W:0.047 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site