lkml.org 
[lkml]   [2023]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] arm64: dts: qcom: sa8775p-ride: Describe sgmii_phy0 irq
Date
There's an irq hooked up, so let's describe it.

Prior to commit 9757300d2750
("pinctrl: qcom: Add intr_target_width field to support increased number of interrupt targets")
one would not see the IRQ fire, despite some (invasive) debugging
showing that the GPIO was in fact asserted, resulting in the interface
staying down.

Now that the IRQ is properly routed we can describe it.

Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
---
arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
index 81a7eeb9cfcd..8fde6935cd6e 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -285,6 +285,7 @@ sgmii_phy0: phy@8 {
compatible = "ethernet-phy-id0141.0dd4";
reg = <0x8>;
device_type = "ethernet-phy";
+ interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
reset-assert-us = <11000>;
reset-deassert-us = <70000>;
--
2.41.0
\
 
 \ /
  Last update: 2023-08-17 23:40    [W:0.131 / U:1.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site