lkml.org 
[lkml]   [2023]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 4/4] arm64: dts: qcom: ipq5018: indicate that SDI should be disabled
Date
Now that SCM has support for indicating that SDI has been enabled by
default, lets set the property so SCM disables it during probing.

Signed-off-by: Robert Marko <robimarko@gmail.com>
---
Changes in v3:
* Use the new boolean property
---
arch/arm64/boot/dts/qcom/ipq5018.dtsi | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 9f13d2dcdfd5..bd0198aaf8d0 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -57,6 +57,7 @@ L2_0: l2-cache {
firmware {
scm {
compatible = "qcom,scm-ipq5018", "qcom,scm";
+ qcom,sdi-enabled;
};
};

--
2.41.0
\
 
 \ /
  Last update: 2023-08-16 18:48    [W:0.298 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site