lkml.org 
[lkml]   [2023]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 3/4] arm64: dts: mediatek: mt8183: disable quad mode for spi nor
From
On 8/15/23 18:31, Hsin-Yi Wang wrote:
> Some of the SKUs are using gigadevice gd25lq64c flash chip. The chip
> default enables quad mode, which results in the write protect pin set to
> IO pin. In mt8183 kukui, we won't use quad enable for all SKUs, so apply
> the property to disable spi nor's quad mode.

Hi Hsin-Yi,

To me this property, and the way you 'apply' it, makes me think that you
are using the devicetree as a configuration and not a description of the
hardware itself.
I think the driver should decide whether to use quad or not depending on
the situation or the pinout of the device (as in your case quad mode
overlaps with the WP pin)

Eugen

>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> ---
> arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> index 6ce16a265e053..8e4761e2b8ff4 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> @@ -877,6 +877,7 @@ w25q64dw: flash@0 {
> compatible = "winbond,w25q64dw", "jedec,spi-nor";
> reg = <0>;
> spi-max-frequency = <25000000>;
> + disable-quad-mode;
> };
> };
>

\
 
 \ /
  Last update: 2023-08-16 13:18    [W:0.102 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site