lkml.org 
[lkml]   [2023]   [Aug]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/2] dt-bindings: i2c: add binding for i2c-hotplug-gpio

> Not a driver but a group of devices (possibly discovered dynamically)
> behind a passive gate (like e.g. PCA9517A with EN tied to a connector pin).
> It's not much different to a I2C gate or mux with a single child bus
> (i2c-mux-gpio that has only a single child).

I agree. To prevent the the bus from spikes when connecting /
disconnecting something like PCA9517A should be in place. And this one
can be considered a 1:1 mux. Just with the exception that Linux cannot
control the gate, but can only react to changes to the enable pin.

Can't we have a driver for the PCA9517 which gets interrupts when the
enable pin changes and then adds / removes the child i2c adapter?

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2023-08-15 22:02    [W:0.153 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site