lkml.org 
[lkml]   [2023]   [Aug]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH v3 1/3] dt-bindings: leds: aw2013: Document interrupt
AW2013 has an optional interrupt pin "INTN" which is used to report
completion of started operations (e.g. power up or LED breath effects).
The driver does not use it (yet) but it should be described for
completeness inside the DT schema.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
Documentation/devicetree/bindings/leds/leds-aw2013.yaml | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/leds/leds-aw2013.yaml b/Documentation/devicetree/bindings/leds/leds-aw2013.yaml
index 08f3e1cfc1b1..a0a0dabcfbf3 100644
--- a/Documentation/devicetree/bindings/leds/leds-aw2013.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-aw2013.yaml
@@ -20,6 +20,11 @@ properties:
reg:
maxItems: 1

+ interrupts:
+ maxItems: 1
+ description: Open-drain, low active interrupt pin "INTN".
+ Used to report completion of operations (power up, LED breath effects).
+
vcc-supply:
description: Regulator providing power to the "VCC" pin.

@@ -52,6 +57,7 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/leds/common.h>

i2c {
@@ -61,6 +67,7 @@ examples:
led-controller@45 {
compatible = "awinic,aw2013";
reg = <0x45>;
+ interrupts = <42 IRQ_TYPE_LEVEL_LOW>;
#address-cells = <1>;
#size-cells = <0>;

--
2.41.0

\
 
 \ /
  Last update: 2023-08-15 19:25    [W:0.082 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site