lkml.org 
[lkml]   [2023]   [Aug]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v3] hwmon: (aquacomputer_d5next) Add selective 200ms delay after sending ctrl report
From
On 8/10/23 11:15, Aleksa Savic wrote:
> On 2023-08-10 06:09:13 GMT+02:00, Guenter Roeck wrote:
>> On Mon, Aug 07, 2023 at 07:20:03PM +0200, Aleksa Savic wrote:
>>> Add a 200ms delay after sending a ctrl report to Quadro,
>>> Octo, D5 Next and Aquaero to give them enough time to
>>> process the request and save the data to memory. Otherwise,
>>> under heavier userspace loads where multiple sysfs entries
>>> are usually set in quick succession, a new ctrl report could
>>> be requested from the device while it's still processing the
>>> previous one and fail with -EPIPE. The delay is only applied
>>> if two ctrl report operations are near each other in time.
>>>
>>> Reported by a user on Github [1] and tested by both of us.
>>>
>>> [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/issues/82
>>>
>>> Fixes: 752b927951ea ("hwmon: (aquacomputer_d5next) Add support for Aquacomputer Octo")
>>> Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
>>
>> I would have suggested to use fsleep() to avoid unnecessary
>> sleep times if they are small, bt I guess it doesn't make much
>> of a difference.
>
> Will keep that in mind.
>
>>
>> Applied.
>
> Will this patch perhaps be marked for stable?
>

It has a Fixes: tag, so it will be applied to affected stable releases
automatically, at least if it applies cleanly. I could have added Cc:
stable@ to make it explicit, but I had pushed it already, and I didn't
want to rebase the branch just for that.

Guenter

\
 
 \ /
  Last update: 2023-08-12 01:08    [W:0.075 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site