lkml.org 
[lkml]   [2023]   [Aug]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/4] platform/chrome: cros_ec_typec: Add Displayport Alternatemode 2.1 Support
Date
Displayport Alternatemode 2.1 requires cable capabilities such as cable
signalling, cable type, DPAM version which then will be used by mux
driver for displayport configuration.

These capabilities can be derived from the Cable VDO data as well as from
the existing EC PD host command interface.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
---
drivers/platform/chrome/cros_ec_typec.c | 30 +++++++++++++++++++++++++
drivers/platform/chrome/cros_ec_typec.h | 1 +
2 files changed, 31 insertions(+)

diff --git a/drivers/platform/chrome/cros_ec_typec.c b/drivers/platform/chrome/cros_ec_typec.c
index d0b4d3fc40ed..eb4a1cb584a2 100644
--- a/drivers/platform/chrome/cros_ec_typec.c
+++ b/drivers/platform/chrome/cros_ec_typec.c
@@ -485,6 +485,32 @@ static int cros_typec_enable_tbt(struct cros_typec_data *typec,
return typec_mux_set(port->mux, &port->state);
}

+static int cros_typec_dp21_support(struct cros_typec_port *port,
+ struct typec_displayport_data dp21_data,
+ struct ec_response_usb_pd_control_v2 *pd_ctrl)
+{
+ u32 cable_vdo = cros_typec_get_cable_vdo(port, USB_TYPEC_DP_SID);
+
+ if (cable_vdo & DP_CAP_DPAM_VERSION) {
+ dp21_data.conf |= cable_vdo;
+ } else {
+ /* Cable Speed */
+ dp21_data.conf |= pd_ctrl->cable_speed << DP_CONF_SIGNALLING_SHIFT;
+
+ /* Cable Type */
+ if (pd_ctrl->cable_gen & USB_PD_CTRL_OPTICAL_CABLE)
+ dp21_data.conf |= DP_CONF_CABLE_TYPE_OPTICAL << DP_CONF_CABLE_TYPE_SHIFT;
+ else if (cros_typec_get_cable_vdo(port, USB_TYPEC_TBT_SID) & TBT_CABLE_RETIMER)
+ dp21_data.conf |= DP_CONF_CABLE_TYPE_RE_TIMER << DP_CONF_CABLE_TYPE_SHIFT;
+ else if (pd_ctrl->cable_gen & USB_PD_CTRL_ACTIVE_CABLE)
+ dp21_data.conf |= DP_CONF_CABLE_TYPE_RE_DRIVER << DP_CONF_CABLE_TYPE_SHIFT;
+ }
+
+ port->state.data = &dp21_data;
+
+ return typec_mux_set(port->mux, &port->state);
+}
+
/* Spoof the VDOs that were likely communicated by the partner. */
static int cros_typec_enable_dp(struct cros_typec_data *typec,
int port_num,
@@ -524,6 +550,9 @@ static int cros_typec_enable_dp(struct cros_typec_data *typec,
port->state.data = &dp_data;
port->state.mode = TYPEC_MODAL_STATE(ffs(pd_ctrl->dp_mode));

+ if (typec->typec_dp21_supported)
+ return cros_typec_dp21_support(port, dp_data, pd_ctrl);
+
ret = cros_typec_retimer_set(port->retimer, port->state);
if (!ret)
ret = typec_mux_set(port->mux, &port->state);
@@ -1196,6 +1225,7 @@ static int cros_typec_probe(struct platform_device *pdev)

typec->typec_cmd_supported = cros_ec_check_features(ec_dev, EC_FEATURE_TYPEC_CMD);
typec->needs_mux_ack = cros_ec_check_features(ec_dev, EC_FEATURE_TYPEC_MUX_REQUIRE_AP_ACK);
+ typec->typec_dp21_supported = cros_ec_check_features(ec_dev, EC_FEATURE_TYPEC_DP2_1);

ret = cros_ec_cmd(typec->ec, 0, EC_CMD_USB_PD_PORTS, NULL, 0,
&resp, sizeof(resp));
diff --git a/drivers/platform/chrome/cros_ec_typec.h b/drivers/platform/chrome/cros_ec_typec.h
index deda180a646f..a588b2780823 100644
--- a/drivers/platform/chrome/cros_ec_typec.h
+++ b/drivers/platform/chrome/cros_ec_typec.h
@@ -37,6 +37,7 @@ struct cros_typec_data {
struct cros_typec_port *ports[EC_USB_PD_MAX_PORTS];
struct notifier_block nb;
struct work_struct port_work;
+ bool typec_dp21_supported;
bool typec_cmd_supported;
bool needs_mux_ack;
};
--
2.25.1
\
 
 \ /
  Last update: 2023-08-11 22:53    [W:0.108 / U:0.668 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site