Messages in this thread | | | Date | Thu, 10 Aug 2023 17:52:10 +0800 | Subject | Re: [PATCH net-next v2 0/5] TSN auto negotiation between 1G and 2.5G | From | Choong Yong Liang <> |
| |
On 4/8/2023 8:04 pm, Andrew Lunn wrote: > On Fri, Aug 04, 2023 at 04:45:22PM +0800, Choong Yong Liang wrote: >> Intel platforms’ integrated Gigabit Ethernet controllers support >> 2.5Gbps mode statically using BIOS programming. In the current >> implementation, the BIOS menu provides an option to select between >> 10/100/1000Mbps and 2.5Gbps modes. Based on the selection, the BIOS >> programs the Phase Lock Loop (PLL) registers. The BIOS also read the >> TSN lane registers from Flexible I/O Adapter (FIA) block and provided >> 10/100/1000Mbps/2.5Gbps information to the stmmac driver. But >> auto-negotiation between 10/100/1000Mbps and 2.5Gbps is not allowed. >> The new proposal is to support auto-negotiation between 10/100/1000Mbps >> and 2.5Gbps . Auto-negotiation between 10, 100, 1000Mbps will use >> in-band auto negotiation. Auto-negotiation between 10/100/1000Mbps and >> 2.5Gbps will work as the following proposed flow, the stmmac driver reads >> the PHY link status registers then identifies the negotiated speed. >> Based on the speed stmmac driver will identify TSN lane registers from >> FIA then send IPC command to the Power Management controller (PMC) >> through PMC driver/API. PMC will act as a proxy to programs the >> PLL registers. > > Have you considered using out of band for all link modes? You might > end up with a cleaner architecture, and not need any phylink/phylib > hacks. > > Andrew Hi Andrew,
Thank you for your feedback. I will study the feasibility of the out-of-band (OOB) approach.
| |