lkml.org 
[lkml]   [2023]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: Fwd: After kernel 6.3.7 or 6.3.8 b43 driver fails
From

On 7/3/23 12:35 PM, Larry Finger wrote:
> Sorry that it took so long to get back to you.
>
> For my ppc32, there is no regression. It took a while to learn the
> pio=1 and qos=0 are BOTH needed. That I do not understand, but with
> both set, the device works with kernel 6.4 and all earlier kernels
> that I tried. Fortunately, I did not need to do the entire bisection.
>
> I am working on eliminating the warning that appears with qos=0, but
> it does not inhibit operations.
>
> @Bagas Sanjaya: Please mark this "regression" as invalid.
>
> Larry
>
I appreciate the time you've spent on this.  I did try 6.4 again (6.4.1
actually) and wlan0 did eventually come active.  When I tried this
before, I probably got freaked by the number of WARNINGs when it wasn't
connecting, but perhaps it was failing for some other reason.  I didn't
realize they were only warnings.

$ uptime
 15:10:52 up 9 min,  3 users,  load average: 0.11, 0.92, 0.85

$ journalctl --boot | grep "WARNING.*__ieee80211_stop_queue+0xcc/0xe0" 
| wc -l
111

Regards.

\
 
 \ /
  Last update: 2023-07-03 22:15    [W:0.088 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site