Messages in this thread | | | Date | Fri, 28 Jul 2023 17:08:05 +0200 | Subject | Re: [ovs-dev] [PATCH v2 net-next 4/5] selftests: openvswitch: add basic ct test case parsing | From | Adrian Moreno <> |
| |
On 7/28/23 13:59, Aaron Conole wrote: > Forwarding via ct() action is an important use case for openvswitch, but > generally would require using a full ovs-vswitchd to get working. Add a > ct action parser for basic ct test case. > > Signed-off-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Adrian Moreno <amorenoz@redhat.com>
> --- > NOTE: 3 lines flag the line-length checkpatch warning, but there didnt > seem to be a really good way of breaking the lines smaller. > > .../selftests/net/openvswitch/openvswitch.sh | 68 +++++++++++++++++++ > .../selftests/net/openvswitch/ovs-dpctl.py | 39 +++++++++++ > 2 files changed, 107 insertions(+) > > diff --git a/tools/testing/selftests/net/openvswitch/openvswitch.sh b/tools/testing/selftests/net/openvswitch/openvswitch.sh > index 5d60a9466dab..40a66c72af0f 100755 > --- a/tools/testing/selftests/net/openvswitch/openvswitch.sh > +++ b/tools/testing/selftests/net/openvswitch/openvswitch.sh > @@ -12,6 +12,7 @@ TRACING=0 > > tests=" > arp_ping eth-arp: Basic arp ping between two NS > + ct_connect_v4 ip4-ct-xon: Basic ipv4 tcp connection using ct > connect_v4 ip4-xon: Basic ipv4 ping between two NS > netlink_checks ovsnl: validate netlink attrs and settings > upcall_interfaces ovs: test the upcall interfaces" > @@ -193,6 +194,73 @@ test_arp_ping () { > return 0 > } > > +# ct_connect_v4 test > +# - client has 1500 byte MTU > +# - server has 1500 byte MTU > +# - use ICMP to ping in each direction > +# - only allow CT state stuff to pass through new in c -> s > +test_ct_connect_v4 () { > + > + which nc >/dev/null 2>/dev/null || return $ksft_skip > + > + sbx_add "test_ct_connect_v4" || return $? > + > + ovs_add_dp "test_ct_connect_v4" ct4 || return 1 > + info "create namespaces" > + for ns in client server; do > + ovs_add_netns_and_veths "test_ct_connect_v4" "ct4" "$ns" \ > + "${ns:0:1}0" "${ns:0:1}1" || return 1 > + done > + > + ip netns exec client ip addr add 172.31.110.10/24 dev c1 > + ip netns exec client ip link set c1 up > + ip netns exec server ip addr add 172.31.110.20/24 dev s1 > + ip netns exec server ip link set s1 up > + > + # Add forwarding for ARP and ip packets - completely wildcarded > + ovs_add_flow "test_ct_connect_v4" ct4 \ > + 'in_port(1),eth(),eth_type(0x0806),arp()' '2' || return 1 > + ovs_add_flow "test_ct_connect_v4" ct4 \ > + 'in_port(2),eth(),eth_type(0x0806),arp()' '1' || return 1 > + ovs_add_flow "test_ct_connect_v4" ct4 \ > + 'ct_state(-trk),eth(),eth_type(0x0800),ipv4()' \ > + 'ct(commit),recirc(0x1)' || return 1 > + ovs_add_flow "test_ct_connect_v4" ct4 \ > + 'recirc_id(0x1),ct_state(+trk+new),in_port(1),eth(),eth_type(0x0800),ipv4(src=172.31.110.10)' \ > + '2' || return 1 > + ovs_add_flow "test_ct_connect_v4" ct4 \ > + 'recirc_id(0x1),ct_state(+trk+est),in_port(1),eth(),eth_type(0x0800),ipv4(src=172.31.110.10)' \ > + '2' || return 1 > + ovs_add_flow "test_ct_connect_v4" ct4 \ > + 'recirc_id(0x1),ct_state(+trk+est),in_port(2),eth(),eth_type(0x0800),ipv4(dst=172.31.110.10)' \ > + '1' || return 1 > + ovs_add_flow "test_ct_connect_v4" ct4 \ > + 'recirc_id(0x1),ct_state(+trk+inv),eth(),eth_type(0x0800),ipv4()' 'drop' || \ > + return 1 > + > + # do a ping > + ovs_sbx "test_ct_connect_v4" ip netns exec client ping 172.31.110.20 -c 3 || return 1 > + > + # create an echo server in 'server' > + echo "server" | \ > + ovs_netns_spawn_daemon "test_ct_connect_v4" "server" \ > + nc -lvnp 4443 > + ovs_sbx "test_ct_connect_v4" ip netns exec client nc -i 1 -zv 172.31.110.20 4443 || return 1 > + > + # Now test in the other direction (should fail) > + echo "client" | \ > + ovs_netns_spawn_daemon "test_ct_connect_v4" "client" \ > + nc -lvnp 4443 > + ovs_sbx "test_ct_connect_v4" ip netns exec client nc -i 1 -zv 172.31.110.10 4443 > + if [ $? == 0 ]; then > + info "ct connect to client was successful" > + return 1 > + fi > + > + info "done..." > + return 0 > +} > + > # connect_v4 test > # - client has 1500 byte MTU > # - server has 1500 byte MTU > diff --git a/tools/testing/selftests/net/openvswitch/ovs-dpctl.py b/tools/testing/selftests/net/openvswitch/ovs-dpctl.py > index 2b869e89c51d..6e258ab9e635 100644 > --- a/tools/testing/selftests/net/openvswitch/ovs-dpctl.py > +++ b/tools/testing/selftests/net/openvswitch/ovs-dpctl.py > @@ -62,6 +62,15 @@ def macstr(mac): > return outstr > > > +def strcspn(str1, str2): > + tot = 0 > + for char in str1: > + if str2.find(char) != -1: > + return tot > + tot += 1 > + return tot > + > + > def strspn(str1, str2): > tot = 0 > for char in str1: > @@ -496,6 +505,36 @@ class ovsactions(nla): > actstr = actstr[strspn(actstr, ", ") :] > parsed = True > > + if parse_starts_block(actstr, "ct(", False): > + actstr = actstr[len("ct(") :] > + ctact = ovsactions.ctact() > + > + for scan in ( > + ("commit", "OVS_CT_ATTR_COMMIT", None), > + ("force_commit", "OVS_CT_ATTR_FORCE_COMMIT", None), > + ("zone", "OVS_CT_ATTR_ZONE", int), > + ("mark", "OVS_CT_ATTR_MARK", int), > + ("helper", "OVS_CT_ATTR_HELPER", lambda x, y: str(x)), > + ("timeout", "OVS_CT_ATTR_TIMEOUT", lambda x, y: str(x)), > + ): > + if actstr.startswith(scan[0]): > + actstr = actstr[len(scan[0]) :] > + if scan[2] is not None: > + if actstr[0] != "=": > + raise ValueError("Invalid ct attr") > + actstr = actstr[1:] > + pos = strcspn(actstr, ",)") > + datum = scan[2](actstr[:pos], 0) > + ctact["attrs"].append([scan[1], datum]) > + actstr = actstr[pos:] > + else: > + ctact["attrs"].append([scan[1], None]) > + actstr = actstr[strspn(actstr, ", ") :] > + > + self["attrs"].append(["OVS_ACTION_ATTR_CT", ctact]) > + parsed = True > + > + actstr = actstr[strspn(actstr, "), ") :] > if not parsed: > raise ValueError("Action str: '%s' not supported" % actstr) >
-- Adrián Moreno
| |