lkml.org 
[lkml]   [2023]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 4/6] arm64: dts: qcom: Add base SM4450 QRD DTS
From


在 7/27/2023 3:59 PM, Konrad Dybcio 写道:
> On 27.07.2023 08:56, Krzysztof Kozlowski wrote:
>> On 27/07/2023 04:35, Tengfei Fan wrote:
>>> Add DTS for Qualcomm QRD platform which uses SM4450 SoC.
>>>
>>> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
>>> ---
>>> arch/arm64/boot/dts/qcom/Makefile | 1 +
>>> arch/arm64/boot/dts/qcom/sm4450-qrd.dts | 18 ++++++++++++++++++
>>> 2 files changed, 19 insertions(+)
>>> create mode 100644 arch/arm64/boot/dts/qcom/sm4450-qrd.dts
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>>> index 337abc4ceb17..db805d0929c8 100644
>>> --- a/arch/arm64/boot/dts/qcom/Makefile
>>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>>> @@ -186,6 +186,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += sdx75-idp.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb
>>> +dtb-$(CONFIG_ARCH_QCOM) += sm4450-qrd.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += sm6115-fxtec-pro1x.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += sm6115p-lenovo-j606f.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb
>>> diff --git a/arch/arm64/boot/dts/qcom/sm4450-qrd.dts b/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
>>> new file mode 100644
>>> index 000000000000..04ad1dd4285a
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
>>> @@ -0,0 +1,18 @@
>>> +// SPDX-License-Identifier: BSD-3-Clause
>>> +/*
>>> + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
>>> + */
>>> +
>>> +/dts-v1/;
>>> +
>>> +#include "sm4450.dtsi"
>>> +/ {
>>> + model = "Qualcomm Technologies, Inc. SM4450 QRD";
>>> + compatible = "qcom,sm4450-qrd", "qcom,sm4450";
>>> +
>>> + aliases { };
>>> +
>>> + chosen {
>>> + bootargs = "console=hvc0 earlycon=hvc0 hvc_dcc.enable=1 cpuidle.off=1";
>>
>> No earlycon, no hvc.enable (there is no such parameter), no cpuidle.off
>> (again don't add fake stuff). So the only suitable argument is console,
>> but this should be actually used via stdout path, although it seems
>> there is no device node for such usage?
> hvc totally comes from Qualcomm downstream and all the Gunyah
> shenanigans..
>
> Tengfei, please ensure the patches are tested against linux-next
> with no additional changes or modules, with a clean Linux userspace
> (or at least a ramdisk).
>
> Konrad
Hi Konrad,
All these patches are tesed on linux-next, and get DCC console.
For support this test, I did a temporal for enable CONFIG_HVC_DCC(this
change haven't push to upstream).

--
Thx and BRs,
Tengfei Fan

\
 
 \ /
  Last update: 2023-07-27 11:09    [W:0.062 / U:0.596 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site