lkml.org 
[lkml]   [2023]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [RFC][PATCH] rtc: sunxi: use external 32k oscillator if provided
From
Hi Mans,

On 27/07/2023 16:01, Mans Rullgard wrote:
> Set the OSC32K_SRC_SEL bit in the LOSC control register if a clock is
> specified in the devicetree.
>
> Signed-off-by: Mans Rullgard <mans@mansr.com>
> ---
> The newer sun6i rtc driver is a proper clk provider with parent
> selection. Doing the same thing in this driver would be difficult
> while staying compatible with existing devicetrees. For that reason,
> this simpler approach seems reasonable.
> ---
> drivers/rtc/rtc-sunxi.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/drivers/rtc/rtc-sunxi.c b/drivers/rtc/rtc-sunxi.c
> index 5d019e3a835a..4f1053eab778 100644
> --- a/drivers/rtc/rtc-sunxi.c
> +++ b/drivers/rtc/rtc-sunxi.c
> @@ -5,6 +5,7 @@
> * Copyright (c) 2013, Carlo Caione <carlo.caione@gmail.com>
> */
>
> +#include <linux/clk.h>
> #include <linux/delay.h>
> #include <linux/err.h>
> #include <linux/fs.h>
> @@ -21,8 +22,10 @@
> #include <linux/types.h>
>
> #define SUNXI_LOSC_CTRL 0x0000
> +#define SUNXI_LOSC_CTRL_KEY (0x16aa << 16)
> #define SUNXI_LOSC_CTRL_RTC_HMS_ACC BIT(8)
> #define SUNXI_LOSC_CTRL_RTC_YMD_ACC BIT(7)
> +#define SUNXI_LOSC_CTRL_OSC32K_SRC_SEL BIT(0)
>
> #define SUNXI_RTC_YMD 0x0004
>
> @@ -422,6 +425,7 @@ MODULE_DEVICE_TABLE(of, sunxi_rtc_dt_ids);
> static int sunxi_rtc_probe(struct platform_device *pdev)
> {
> struct sunxi_rtc_dev *chip;
> + struct clk *extclk;
> int ret;
>
> chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
> @@ -455,6 +459,14 @@ static int sunxi_rtc_probe(struct platform_device *pdev)
> return -ENODEV;
> }
>
> + /* use external oscillator if present */
> + extclk = devm_clk_get_optional_enabled(&pdev->dev, NULL);
> + if (IS_ERR(extclk))
> + return PTR_ERR(extclk);
> + if (extclk)
> + writel(SUNXI_LOSC_CTRL_KEY | SUNXI_LOSC_CTRL_OSC32K_SRC_SEL,
> + chip->base + SUNXI_LOSC_CTRL);

This should be a read-modify-write operation, since we don't want to
disturb other bits in this register.

In general this looks OK to me, but would need to be documented in the
bindings docs, to allow an optional clocks property.

Cheers,
Andre

> +
> /* clear the alarm count value */
> writel(0, chip->base + SUNXI_ALRM_DHMS);
>

\
 
 \ /
  Last update: 2023-07-27 18:54    [W:0.027 / U:1.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site