Messages in this thread Patch in this message | | | From | Tudor Ambarus <> | Subject | [PATCH v4 08/11] mtd: spi-nor: spansion: add support for S28HS02GT | Date | Wed, 26 Jul 2023 10:52:54 +0300 |
| |
From: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Add support for S28HS02GT. Infineon S28HS02GT is a 2Gb, multi-chip package, Octal SPI Flash.
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> --- drivers/mtd/spi-nor/spansion.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c index d7aa0a90949a..1c5671a3751a 100644 --- a/drivers/mtd/spi-nor/spansion.c +++ b/drivers/mtd/spi-nor/spansion.c @@ -693,22 +693,23 @@ static int cypress_nor_set_octal_dtr(struct spi_nor *nor, bool enable) static int s28hx_t_post_sfdp_fixup(struct spi_nor *nor) { + struct spi_nor_flash_parameter *params = nor->params; /* * On older versions of the flash the xSPI Profile 1.0 table has the * 8D-8D-8D Fast Read opcode as 0x00. But it actually should be 0xEE. */ - if (nor->params->reads[SNOR_CMD_READ_8_8_8_DTR].opcode == 0) - nor->params->reads[SNOR_CMD_READ_8_8_8_DTR].opcode = + if (params->reads[SNOR_CMD_READ_8_8_8_DTR].opcode == 0) + params->reads[SNOR_CMD_READ_8_8_8_DTR].opcode = SPINOR_OP_CYPRESS_RD_FAST; /* This flash is also missing the 4-byte Page Program opcode bit. */ - spi_nor_set_pp_settings(&nor->params->page_programs[SNOR_CMD_PP], + spi_nor_set_pp_settings(¶ms->page_programs[SNOR_CMD_PP], SPINOR_OP_PP_4B, SNOR_PROTO_1_1_1); /* * Since xSPI Page Program opcode is backward compatible with * Legacy SPI, use Legacy SPI opcode there as well. */ - spi_nor_set_pp_settings(&nor->params->page_programs[SNOR_CMD_PP_8_8_8_DTR], + spi_nor_set_pp_settings(¶ms->page_programs[SNOR_CMD_PP_8_8_8_DTR], SPINOR_OP_PP_4B, SNOR_PROTO_8_8_8_DTR); /* @@ -716,7 +717,11 @@ static int s28hx_t_post_sfdp_fixup(struct spi_nor *nor) * address bytes needed for Read Status Register command as 0 but the * actual value for that is 4. */ - nor->params->rdsr_addr_nbytes = 4; + params->rdsr_addr_nbytes = 4; + + /* The 2 Gb parts duplicate info and advertise 4 dice instead of 2. */ + if (params->size == SZ_256M) + params->n_dice = 2; return cypress_nor_get_page_size(nor); } @@ -916,6 +921,11 @@ static const struct flash_info spansion_nor_parts[] = { MFR_FLAGS(USE_CLPEF) .fixups = &s28hx_t_fixups, }, + { "s28hs02gt", INFO(0x345b1c, 0, 0, 0) + PARSE_SFDP + MFR_FLAGS(USE_CLPEF) + .fixups = &s28hx_t_fixups, + }, }; /** -- 2.34.1
| |