Messages in this thread | | | Date | Wed, 26 Jul 2023 12:57:48 +0530 | Subject | Re: [PATCH 2/2] spi: spi-qcom-qspi: Add mem_ops to avoid PIO for badly sized reads | From | Vijaya Krishna Nivarthi <> |
| |
On 7/25/2023 11:32 PM, Douglas Anderson wrote: > In the patch ("spi: spi-qcom-qspi: Fallback to PIO for xfers that > aren't multiples of 4 bytes") we detect reads that we can't handle > properly and fallback to PIO mode. While that's correct behavior, we > can do better by adding "spi_controller_mem_ops" for our > controller. Once we do this then the caller will give us a transfer > that's a multiple of 4-bytes so we can DMA. > > Fixes: b5762d95607e ("spi: spi-qcom-qspi: Add DMA mode support") > Signed-off-by: Douglas Anderson <dianders@chromium.org>
I checked with a couple of folks here and seemingly the POR for QSPI controller is for storage device only, so in all likelihood we should be having a spi-flash at the other end.
For other devices there is QUP anyway.
Hence personally I am happy with this change.
Thank you...
Reviewed-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
> --- > > drivers/spi/spi-qcom-qspi.c | 25 +++++++++++++++++++++++++ > 1 file changed, 25 insertions(+) > > diff --git a/drivers/spi/spi-qcom-qspi.c b/drivers/spi/spi-qcom-qspi.c > index 39b4d8a8107a..b2bbcfd93637 100644 > --- a/drivers/spi/spi-qcom-qspi.c > +++ b/drivers/spi/spi-qcom-qspi.c > @@ -659,6 +659,30 @@ static irqreturn_t qcom_qspi_irq(int irq, void *dev_id) > return ret; > } > > +static int qcom_qspi_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op) > +{ > + /* > + * If qcom_qspi_can_dma() is going to return false we don't need to > + * adjust anything. > + */ > + if (op->data.nbytes <= QSPI_MAX_BYTES_FIFO) > + return 0; > + > + /* > + * When reading, the transfer needs to be a multiple of 4 bytes so > + * shrink the transfer if that's not true. The caller will then do a > + * second transfer to finish things up. > + */ > + if (op->data.dir == SPI_MEM_DATA_IN && (op->data.nbytes & 0x3)) > + op->data.nbytes &= ~0x3; > + > + return 0; > +} > + > +static const struct spi_controller_mem_ops qcom_qspi_mem_ops = { > + .adjust_op_size = qcom_qspi_adjust_op_size, > +}; > + > static int qcom_qspi_probe(struct platform_device *pdev) > { > int ret; > @@ -743,6 +767,7 @@ static int qcom_qspi_probe(struct platform_device *pdev) > if (of_property_read_bool(pdev->dev.of_node, "iommus")) > master->can_dma = qcom_qspi_can_dma; > master->auto_runtime_pm = true; > + master->mem_ops = &qcom_qspi_mem_ops; > > ret = devm_pm_opp_set_clkname(&pdev->dev, "core"); > if (ret)
| |