lkml.org 
[lkml]   [2023]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 3/4] interconnect: qcom: sdm660: Set AB/IB coefficients
Some buses and nodes need additional manual adjustments atop the usual
calculations. Fill in the missing coefficients.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
drivers/interconnect/qcom/sdm660.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/interconnect/qcom/sdm660.c b/drivers/interconnect/qcom/sdm660.c
index 36962f7bd7bb..cb93e2f2c2f4 100644
--- a/drivers/interconnect/qcom/sdm660.c
+++ b/drivers/interconnect/qcom/sdm660.c
@@ -602,6 +602,7 @@ static struct qcom_icc_node mas_mdp_p0 = {
.name = "mas_mdp_p0",
.id = SDM660_MASTER_MDP_P0,
.buswidth = 16,
+ .ib_percent = 200,
.mas_rpm_id = 8,
.slv_rpm_id = -1,
.qos.ap_owned = true,
@@ -621,6 +622,7 @@ static struct qcom_icc_node mas_mdp_p1 = {
.name = "mas_mdp_p1",
.id = SDM660_MASTER_MDP_P1,
.buswidth = 16,
+ .ib_percent = 200,
.mas_rpm_id = 61,
.slv_rpm_id = -1,
.qos.ap_owned = true,
@@ -1540,6 +1542,7 @@ static const struct qcom_icc_desc sdm660_bimc = {
.num_nodes = ARRAY_SIZE(sdm660_bimc_nodes),
.bus_clk_desc = &bimc_clk,
.regmap_cfg = &sdm660_bimc_regmap_config,
+ .ab_percent = 153,
};

static struct qcom_icc_node * const sdm660_cnoc_nodes[] = {
@@ -1659,6 +1662,7 @@ static const struct qcom_icc_desc sdm660_mnoc = {
.intf_clocks = mm_intf_clocks,
.num_intf_clocks = ARRAY_SIZE(mm_intf_clocks),
.regmap_cfg = &sdm660_mnoc_regmap_config,
+ .ab_percent = 153,
};

static struct qcom_icc_node * const sdm660_snoc_nodes[] = {
--
2.41.0

\
 
 \ /
  Last update: 2023-07-26 18:27    [W:0.094 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site