Messages in this thread | | | Date | Tue, 25 Jul 2023 16:07:49 +0200 | Subject | Re: [PATCH 07/10] arm64: dts: st: add RIFSC as a domain controller for STM32MP25x boards | From | Gatien CHEVALLIER <> |
| |
Hi Alex,
On 7/6/23 11:30, Gatien CHEVALLIER wrote: > Hi Alex, > > On 7/6/23 11:25, Alexandre TORGUE wrote: >> Hi Gatien >> >> On 7/5/23 19:27, Gatien Chevallier wrote: >>> RIFSC is a firewall controller. Change its compatible so that is matches >>> the documentation and reference RIFSC as a feature-domain-controller. >>> >>> Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com> >>> --- >>> arch/arm64/boot/dts/st/stm32mp251.dtsi | 5 ++++- >>> 1 file changed, 4 insertions(+), 1 deletion(-) >>> >>> diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi >>> b/arch/arm64/boot/dts/st/stm32mp251.dtsi >>> index 5268a4321841..62101084cab8 100644 >>> --- a/arch/arm64/boot/dts/st/stm32mp251.dtsi >>> +++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi >>> @@ -106,17 +106,20 @@ soc@0 { >>> ranges = <0x0 0x0 0x0 0x80000000>; >>> rifsc: rifsc-bus@42080000 { >>> - compatible = "simple-bus"; >>> + compatible = "st,stm32mp25-rifsc"; >> >> You could keep "simple-bus" compatible (in second position). In case >> of the RIFSC is not probed, the platform will be able to boot. If you >> agree you can use the same for ETZPC. >> >> Cheers >> Alex > > Sure, good point. > > I'll change that in V2 > > Best regards, > Gatien
Actually, it would be a bad idea to keep "simple-bus" as a compatible.
Practical example: 1) Firewall controller forbids a device probe by marking the device's node as populated (OF_POPULATED flag). 2) The simple-bus, which is simple, populates all the devices from the device tree data, overriding what the firewall bus has done. 3)=>Forbidden device's driver will be probed.
I think it's best to keep one compatible. If someone wants these drivers as external modules, then it'll be best to handle this differently. I'll resubmit with a single compatible for V2, please do not hesitate to comment on the V2 if you're not okay with this.
Best regards, Gatien
>> >>> reg = <0x42080000 0x1000>; >>> #address-cells = <1>; >>> #size-cells = <1>; >>> ranges; >>> + feature-domain-controller; >>> + #feature-domain-cells = <1>; >>> usart2: serial@400e0000 { >>> compatible = "st,stm32h7-uart"; >>> reg = <0x400e0000 0x400>; >>> interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; >>> clocks = <&ck_flexgen_08>; >>> + feature-domains = <&rifsc 32>; >>> status = "disabled"; >>> }; >>> }; >>
| |