lkml.org 
[lkml]   [2023]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH V13 - RESEND 06/10] arm64/perf: Enable branch stack events via FEAT_BRBE
From


在 2023/7/11 16:24, Anshuman Khandual 写道:
> This enables branch stack sampling events in ARMV8 PMU, via an architecture
> feature FEAT_BRBE aka branch record buffer extension. This defines required
> branch helper functions pmuv8pmu_branch_XXXXX() and the implementation here
> is wrapped with a new config option CONFIG_ARM64_BRBE.
>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Will Deacon <will@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> Tested-by: James Clark <james.clark@arm.com>
> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
> ---
> arch/arm64/include/asm/perf_event.h | 9 +
> drivers/perf/Kconfig | 11 +
> drivers/perf/Makefile | 1 +
> drivers/perf/arm_brbe.c | 549 ++++++++++++++++++++++++++++
> drivers/perf/arm_brbe.h | 257 +++++++++++++
> drivers/perf/arm_pmuv3.c | 4 +
> 6 files changed, 831 insertions(+)
> create mode 100644 drivers/perf/arm_brbe.c
> create mode 100644 drivers/perf/arm_brbe.h
>
> diff --git a/arch/arm64/include/asm/perf_event.h b/arch/arm64/include/asm/perf_event.h
> index ebc392ba3559..49a973571415 100644
> --- a/arch/arm64/include/asm/perf_event.h
> +++ b/arch/arm64/include/asm/perf_event.h
> @@ -31,6 +31,14 @@ struct perf_event;
> #ifdef CONFIG_PERF_EVENTS
> static inline bool has_branch_stack(struct perf_event *event);
>
> +#ifdef CONFIG_ARM64_BRBE
> +void armv8pmu_branch_read(struct pmu_hw_events *cpuc, struct perf_event *event);
> +bool armv8pmu_branch_attr_valid(struct perf_event *event);
> +void armv8pmu_branch_enable(struct perf_event *event);
> +void armv8pmu_branch_disable(struct perf_event *event);
> +void armv8pmu_branch_probe(struct arm_pmu *arm_pmu);
> +void armv8pmu_branch_reset(void);
> +#else
> static inline void armv8pmu_branch_read(struct pmu_hw_events *cpuc, struct perf_event *event)
> {
> WARN_ON_ONCE(!has_branch_stack(event));
> @@ -56,3 +64,4 @@ static inline void armv8pmu_branch_probe(struct arm_pmu *arm_pmu) { }
> static inline void armv8pmu_branch_reset(void) { }
> #endif
> #endif
> +#endif
> diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
> index f4572a5cca72..7c8448051741 100644
> --- a/drivers/perf/Kconfig
> +++ b/drivers/perf/Kconfig
> @@ -180,6 +180,17 @@ config ARM_SPE_PMU
> Extension, which provides periodic sampling of operations in
> the CPU pipeline and reports this via the perf AUX interface.
>
> +config ARM64_BRBE
> + bool "Enable support for Branch Record Buffer Extension (BRBE)"
> + depends on PERF_EVENTS && ARM64 && ARM_PMU
> + default y
> + help
> + Enable perf support for Branch Record Buffer Extension (BRBE) which
> + records all branches taken in an execution path. This supports some
> + branch types and privilege based filtering. It captured additional
> + relevant information such as cycle count, misprediction and branch
> + type, branch privilege level etc.
> +
> config ARM_DMC620_PMU
> tristate "Enable PMU support for the ARM DMC-620 memory controller"
> depends on (ARM64 && ACPI) || COMPILE_TEST
> diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
> index 16b3ec4db916..a8b7bc22e3d6 100644
> --- a/drivers/perf/Makefile
> +++ b/drivers/perf/Makefile
> @@ -18,6 +18,7 @@ obj-$(CONFIG_RISCV_PMU_SBI) += riscv_pmu_sbi.o
> obj-$(CONFIG_THUNDERX2_PMU) += thunderx2_pmu.o
> obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o
> obj-$(CONFIG_ARM_SPE_PMU) += arm_spe_pmu.o
> +obj-$(CONFIG_ARM64_BRBE) += arm_brbe.o
> obj-$(CONFIG_ARM_DMC620_PMU) += arm_dmc620_pmu.o
> obj-$(CONFIG_MARVELL_CN10K_TAD_PMU) += marvell_cn10k_tad_pmu.o
> obj-$(CONFIG_MARVELL_CN10K_DDR_PMU) += marvell_cn10k_ddr_pmu.o
> diff --git a/drivers/perf/arm_brbe.c b/drivers/perf/arm_brbe.c
> new file mode 100644
> index 000000000000..79106300cf2e
> --- /dev/null
> +++ b/drivers/perf/arm_brbe.c
> @@ -0,0 +1,549 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Branch Record Buffer Extension Driver.
> + *
> + * Copyright (C) 2022 ARM Limited
> + *
> + * Author: Anshuman Khandual <anshuman.khandual@arm.com>
> + */
> +#include "arm_brbe.h"
> +
> +static bool valid_brbe_nr(int brbe_nr)
> +{
> + return brbe_nr == BRBIDR0_EL1_NUMREC_8 ||
> + brbe_nr == BRBIDR0_EL1_NUMREC_16 ||
> + brbe_nr == BRBIDR0_EL1_NUMREC_32 ||
> + brbe_nr == BRBIDR0_EL1_NUMREC_64;
> +}
> +
> +static bool valid_brbe_cc(int brbe_cc)
> +{
> + return brbe_cc == BRBIDR0_EL1_CC_20_BIT;
> +}
> +
> +static bool valid_brbe_format(int brbe_format)
> +{
> + return brbe_format == BRBIDR0_EL1_FORMAT_0;
> +}
> +
> +static bool valid_brbe_version(int brbe_version)
> +{
> + return brbe_version == ID_AA64DFR0_EL1_BRBE_IMP ||
> + brbe_version == ID_AA64DFR0_EL1_BRBE_BRBE_V1P1;
> +}
> +
> +static void select_brbe_bank(int bank)
> +{
> + u64 brbfcr;
> +
> + WARN_ON(bank > BRBE_BANK_IDX_1);
> + brbfcr = read_sysreg_s(SYS_BRBFCR_EL1);
> + brbfcr &= ~BRBFCR_EL1_BANK_MASK;
> + brbfcr |= SYS_FIELD_PREP(BRBFCR_EL1, BANK, bank);
> + write_sysreg_s(brbfcr, SYS_BRBFCR_EL1);
> + isb();
> +}
> +
> +/*
> + * Generic perf branch filters supported on BRBE
> + *
> + * New branch filters need to be evaluated whether they could be supported on
> + * BRBE. This ensures that such branch filters would not just be accepted, to
> + * fail silently. PERF_SAMPLE_BRANCH_HV is a special case that is selectively
> + * supported only on platforms where kernel is in hyp mode.
> + */
> +#define BRBE_EXCLUDE_BRANCH_FILTERS (PERF_SAMPLE_BRANCH_ABORT_TX | \
> + PERF_SAMPLE_BRANCH_IN_TX | \
> + PERF_SAMPLE_BRANCH_NO_TX | \
> + PERF_SAMPLE_BRANCH_CALL_STACK)
> +
> +#define BRBE_ALLOWED_BRANCH_FILTERS (PERF_SAMPLE_BRANCH_USER | \
> + PERF_SAMPLE_BRANCH_KERNEL | \
> + PERF_SAMPLE_BRANCH_HV | \
> + PERF_SAMPLE_BRANCH_ANY | \
> + PERF_SAMPLE_BRANCH_ANY_CALL | \
> + PERF_SAMPLE_BRANCH_ANY_RETURN | \
> + PERF_SAMPLE_BRANCH_IND_CALL | \
> + PERF_SAMPLE_BRANCH_COND | \
> + PERF_SAMPLE_BRANCH_IND_JUMP | \
> + PERF_SAMPLE_BRANCH_CALL | \
> + PERF_SAMPLE_BRANCH_NO_FLAGS | \
> + PERF_SAMPLE_BRANCH_NO_CYCLES | \
> + PERF_SAMPLE_BRANCH_TYPE_SAVE | \
> + PERF_SAMPLE_BRANCH_HW_INDEX | \
> + PERF_SAMPLE_BRANCH_PRIV_SAVE)
> +
> +#define BRBE_PERF_BRANCH_FILTERS (BRBE_ALLOWED_BRANCH_FILTERS | \
> + BRBE_EXCLUDE_BRANCH_FILTERS)
> +
> +bool armv8pmu_branch_attr_valid(struct perf_event *event)
> +{
> + u64 branch_type = event->attr.branch_sample_type;
> +
> + /*
> + * Ensure both perf branch filter allowed and exclude
> + * masks are always in sync with the generic perf ABI.
> + */
> + BUILD_BUG_ON(BRBE_PERF_BRANCH_FILTERS != (PERF_SAMPLE_BRANCH_MAX - 1));
> +
> + if (branch_type & ~BRBE_ALLOWED_BRANCH_FILTERS) {
> + pr_debug_once("requested branch filter not supported 0x%llx\n", branch_type);
> + return false;
> + }
> +
> + /*
> + * If the event does not have at least one of the privilege
> + * branch filters as in PERF_SAMPLE_BRANCH_PLM_ALL, the core
> + * perf will adjust its value based on perf event's existing
> + * privilege level via attr.exclude_[user|kernel|hv].
> + *
> + * As event->attr.branch_sample_type might have been changed
> + * when the event reaches here, it is not possible to figure
> + * out whether the event originally had HV privilege request
> + * or got added via the core perf. Just report this situation
> + * once and continue ignoring if there are other instances.
> + */
> + if ((branch_type & PERF_SAMPLE_BRANCH_HV) && !is_kernel_in_hyp_mode())
> + pr_debug_once("hypervisor privilege filter not supported 0x%llx\n", branch_type);
> +
> + return true;
> +}
> +
> +static int brbe_attributes_probe(struct arm_pmu *armpmu, u32 brbe)
> +{
> + u64 brbidr = read_sysreg_s(SYS_BRBIDR0_EL1);
> + int brbe_version, brbe_format, brbe_cc, brbe_nr;
> +
> + brbe_version = brbe;
> + brbe_format = brbe_get_format(brbidr);
> + brbe_cc = brbe_get_cc_bits(brbidr);
> + brbe_nr = brbe_get_numrec(brbidr);
> + armpmu->reg_brbidr = brbidr;
> +
> + if (!valid_brbe_version(brbe_version) ||
> + !valid_brbe_format(brbe_format) ||
> + !valid_brbe_cc(brbe_cc) ||
> + !valid_brbe_nr(brbe_nr))
> + return -EOPNOTSUPP;
> + return 0;
> +}
> +
> +void armv8pmu_branch_probe(struct arm_pmu *armpmu)
> +{
> + u64 aa64dfr0 = read_sysreg_s(SYS_ID_AA64DFR0_EL1);
> + u32 brbe;
> +
> + brbe = cpuid_feature_extract_unsigned_field(aa64dfr0, ID_AA64DFR0_EL1_BRBE_SHIFT);
> + if (!brbe)
> + return;
> +
> + if (brbe_attributes_probe(armpmu, brbe))
> + return;
> +
> + armpmu->has_branch_stack = 1;
> +}
> +
> +static u64 branch_type_to_brbfcr(int branch_type)
> +{
> + u64 brbfcr = 0;
> +
> + if (branch_type & PERF_SAMPLE_BRANCH_ANY) {
> + brbfcr |= BRBFCR_EL1_BRANCH_FILTERS;
> + return brbfcr;
> + }
> +
> + if (branch_type & PERF_SAMPLE_BRANCH_ANY_CALL) {
> + brbfcr |= BRBFCR_EL1_INDCALL;
> + brbfcr |= BRBFCR_EL1_DIRCALL;
> + }
> +
> + if (branch_type & PERF_SAMPLE_BRANCH_ANY_RETURN)
> + brbfcr |= BRBFCR_EL1_RTN;
> +
> + if (branch_type & PERF_SAMPLE_BRANCH_IND_CALL)
> + brbfcr |= BRBFCR_EL1_INDCALL;
> +
> + if (branch_type & PERF_SAMPLE_BRANCH_COND)
> + brbfcr |= BRBFCR_EL1_CONDDIR;
> +
> + if (branch_type & PERF_SAMPLE_BRANCH_IND_JUMP)
> + brbfcr |= BRBFCR_EL1_INDIRECT;
> +
> + if (branch_type & PERF_SAMPLE_BRANCH_CALL)
> + brbfcr |= BRBFCR_EL1_DIRCALL;
> +
> + return brbfcr;
> +}
> +
> +static u64 branch_type_to_brbcr(int branch_type)
> +{
> + u64 brbcr = BRBCR_EL1_DEFAULT_TS;
> +
> + /*
> + * BRBE should be paused on PMU interrupt while tracing kernel
> + * space to stop capturing further branch records. Otherwise
> + * interrupt handler branch records might get into the samples
> + * which is not desired.
> + *
> + * BRBE need not be paused on PMU interrupt while tracing only
> + * the user space, because it will automatically be inside the
> + * prohibited region. But even after PMU overflow occurs, the
> + * interrupt could still take much more cycles, before it can
> + * be taken and by that time BRBE will have been overwritten.
> + * Hence enable pause on PMU interrupt mechanism even for user
> + * only traces as well.
> + */
> + brbcr |= BRBCR_EL1_FZP;
> +
> + /*
> + * When running in the hyp mode, writing into BRBCR_EL1
> + * actually writes into BRBCR_EL2 instead. Field E2BRE
> + * is also at the same position as E1BRE.
> + */
> + if (branch_type & PERF_SAMPLE_BRANCH_USER)
> + brbcr |= BRBCR_EL1_E0BRE;
> +
> + if (branch_type & PERF_SAMPLE_BRANCH_KERNEL)
> + brbcr |= BRBCR_EL1_E1BRE;
> +
> + if (branch_type & PERF_SAMPLE_BRANCH_HV) {
> + if (is_kernel_in_hyp_mode())
> + brbcr |= BRBCR_EL1_E1BRE;
> + }
> +
> + if (!(branch_type & PERF_SAMPLE_BRANCH_NO_CYCLES))
> + brbcr |= BRBCR_EL1_CC;

Hi Anshuman,

Here is problem about enable CYCLES_COUNT. The SPEC defines that the CYCLES_COUNT is only

valid when the BRECR_EL1.CC & BRBCR_EL2.CC is true. And here the SPEC also defines that

when PSTATE.EL == EL2 and HCR_EL2.E2h == '1', 'MSR BRBCR_EL1, <Xt>' means writing to

BRBCR_EL2 actually. So 'armv8pmu_branch_enable' can only set the BRBCR_EL2.CC, while the

BRECR_EL1.CC is still 0. The CYCLES_COUNT will be always 0 in records.

As a solution, maybe BRBCR_EL12 should be added for driver according to the registers definition.

Or, do you have a more standard solution?

Thanks,

Yang


> +
> + if (!(branch_type & PERF_SAMPLE_BRANCH_NO_FLAGS))
> + brbcr |= BRBCR_EL1_MPRED;
> +
> + /*
> + * The exception and exception return branches could be
> + * captured, irrespective of the perf event's privilege.
> + * If the perf event does not have enough privilege for
> + * a given exception level, then addresses which falls
> + * under that exception level will be reported as zero
> + * for the captured branch record, creating source only
> + * or target only records.
> + */
> + if (branch_type & PERF_SAMPLE_BRANCH_ANY) {
> + brbcr |= BRBCR_EL1_EXCEPTION;
> + brbcr |= BRBCR_EL1_ERTN;
> + }
> +
> + if (branch_type & PERF_SAMPLE_BRANCH_ANY_CALL)
> + brbcr |= BRBCR_EL1_EXCEPTION;
> +
> + if (branch_type & PERF_SAMPLE_BRANCH_ANY_RETURN)
> + brbcr |= BRBCR_EL1_ERTN;
> +
> + return brbcr & BRBCR_EL1_DEFAULT_CONFIG;
> +}
> +
> +void armv8pmu_branch_enable(struct perf_event *event)
> +{
> + u64 branch_type = event->attr.branch_sample_type;
> + u64 brbfcr, brbcr;
> +
> + brbfcr = read_sysreg_s(SYS_BRBFCR_EL1);
> + brbfcr &= ~BRBFCR_EL1_DEFAULT_CONFIG;
> + brbfcr |= branch_type_to_brbfcr(branch_type);
> + write_sysreg_s(brbfcr, SYS_BRBFCR_EL1);
> + isb();
> +
> + brbcr = read_sysreg_s(SYS_BRBCR_EL1);
> + brbcr &= ~BRBCR_EL1_DEFAULT_CONFIG;
> + brbcr |= branch_type_to_brbcr(branch_type);
> + write_sysreg_s(brbcr, SYS_BRBCR_EL1);
> + isb();
> + armv8pmu_branch_reset();
> +}
> +
> +void armv8pmu_branch_disable(struct perf_event *event)
> +{
> + u64 brbfcr = read_sysreg_s(SYS_BRBFCR_EL1);
> + u64 brbcr = read_sysreg_s(SYS_BRBCR_EL1);
> +
> + brbcr &= ~(BRBCR_EL1_E0BRE | BRBCR_EL1_E1BRE);
> + brbfcr |= BRBFCR_EL1_PAUSED;
> + write_sysreg_s(brbcr, SYS_BRBCR_EL1);
> + write_sysreg_s(brbfcr, SYS_BRBFCR_EL1);
> + isb();
> +}
> +
> +static void brbe_set_perf_entry_type(struct perf_branch_entry *entry, u64 brbinf)
> +{
> + int brbe_type = brbe_get_type(brbinf);
> +
> + switch (brbe_type) {
> + case BRBINFx_EL1_TYPE_UNCOND_DIRECT:
> + entry->type = PERF_BR_UNCOND;
> + break;
> + case BRBINFx_EL1_TYPE_INDIRECT:
> + entry->type = PERF_BR_IND;
> + break;
> + case BRBINFx_EL1_TYPE_DIRECT_LINK:
> + entry->type = PERF_BR_CALL;
> + break;
> + case BRBINFx_EL1_TYPE_INDIRECT_LINK:
> + entry->type = PERF_BR_IND_CALL;
> + break;
> + case BRBINFx_EL1_TYPE_RET:
> + entry->type = PERF_BR_RET;
> + break;
> + case BRBINFx_EL1_TYPE_COND_DIRECT:
> + entry->type = PERF_BR_COND;
> + break;
> + case BRBINFx_EL1_TYPE_CALL:
> + entry->type = PERF_BR_CALL;
> + break;
> + case BRBINFx_EL1_TYPE_TRAP:
> + entry->type = PERF_BR_SYSCALL;
> + break;
> + case BRBINFx_EL1_TYPE_ERET:
> + entry->type = PERF_BR_ERET;
> + break;
> + case BRBINFx_EL1_TYPE_IRQ:
> + entry->type = PERF_BR_IRQ;
> + break;
> + case BRBINFx_EL1_TYPE_DEBUG_HALT:
> + entry->type = PERF_BR_EXTEND_ABI;
> + entry->new_type = PERF_BR_ARM64_DEBUG_HALT;
> + break;
> + case BRBINFx_EL1_TYPE_SERROR:
> + entry->type = PERF_BR_SERROR;
> + break;
> + case BRBINFx_EL1_TYPE_INSN_DEBUG:
> + entry->type = PERF_BR_EXTEND_ABI;
> + entry->new_type = PERF_BR_ARM64_DEBUG_INST;
> + break;
> + case BRBINFx_EL1_TYPE_DATA_DEBUG:
> + entry->type = PERF_BR_EXTEND_ABI;
> + entry->new_type = PERF_BR_ARM64_DEBUG_DATA;
> + break;
> + case BRBINFx_EL1_TYPE_ALIGN_FAULT:
> + entry->type = PERF_BR_EXTEND_ABI;
> + entry->new_type = PERF_BR_NEW_FAULT_ALGN;
> + break;
> + case BRBINFx_EL1_TYPE_INSN_FAULT:
> + entry->type = PERF_BR_EXTEND_ABI;
> + entry->new_type = PERF_BR_NEW_FAULT_INST;
> + break;
> + case BRBINFx_EL1_TYPE_DATA_FAULT:
> + entry->type = PERF_BR_EXTEND_ABI;
> + entry->new_type = PERF_BR_NEW_FAULT_DATA;
> + break;
> + case BRBINFx_EL1_TYPE_FIQ:
> + entry->type = PERF_BR_EXTEND_ABI;
> + entry->new_type = PERF_BR_ARM64_FIQ;
> + break;
> + case BRBINFx_EL1_TYPE_DEBUG_EXIT:
> + entry->type = PERF_BR_EXTEND_ABI;
> + entry->new_type = PERF_BR_ARM64_DEBUG_EXIT;
> + break;
> + default:
> + pr_warn_once("%d - unknown branch type captured\n", brbe_type);
> + entry->type = PERF_BR_UNKNOWN;
> + break;
> + }
> +}
> +
> +static int brbe_get_perf_priv(u64 brbinf)
> +{
> + int brbe_el = brbe_get_el(brbinf);
> +
> + switch (brbe_el) {
> + case BRBINFx_EL1_EL_EL0:
> + return PERF_BR_PRIV_USER;
> + case BRBINFx_EL1_EL_EL1:
> + return PERF_BR_PRIV_KERNEL;
> + case BRBINFx_EL1_EL_EL2:
> + if (is_kernel_in_hyp_mode())
> + return PERF_BR_PRIV_KERNEL;
> + return PERF_BR_PRIV_HV;
> + default:
> + pr_warn_once("%d - unknown branch privilege captured\n", brbe_el);
> + return PERF_BR_PRIV_UNKNOWN;
> + }
> +}
> +
> +static void capture_brbe_flags(struct perf_branch_entry *entry, struct perf_event *event,
> + u64 brbinf)
> +{
> + if (branch_sample_type(event))
> + brbe_set_perf_entry_type(entry, brbinf);
> +
> + if (!branch_sample_no_cycles(event))
> + entry->cycles = brbe_get_cycles(brbinf);
> +
> + if (!branch_sample_no_flags(event)) {
> + /*
> + * BRBINFx_EL1.LASTFAILED indicates that a TME transaction failed (or
> + * was cancelled) prior to this record, and some number of records
> + * prior to this one, may have been generated during an attempt to
> + * execute the transaction.
> + *
> + * We will remove such entries later in process_branch_aborts().
> + */
> + entry->abort = brbe_get_lastfailed(brbinf);
> +
> + /*
> + * All these information (i.e transaction state and mispredicts)
> + * are available for source only and complete branch records.
> + */
> + if (brbe_record_is_complete(brbinf) ||
> + brbe_record_is_source_only(brbinf)) {
> + entry->mispred = brbe_get_mispredict(brbinf);
> + entry->predicted = !entry->mispred;
> + entry->in_tx = brbe_get_in_tx(brbinf);
> + }
> + }
> +
> + if (branch_sample_priv(event)) {
> + /*
> + * All these information (i.e branch privilege level) are
> + * available for target only and complete branch records.
> + */
> + if (brbe_record_is_complete(brbinf) ||
> + brbe_record_is_target_only(brbinf))
> + entry->priv = brbe_get_perf_priv(brbinf);
> + }
> +}
> +
> +/*
> + * A branch record with BRBINFx_EL1.LASTFAILED set, implies that all
> + * preceding consecutive branch records, that were in a transaction
> + * (i.e their BRBINFx_EL1.TX set) have been aborted.
> + *
> + * Similarly BRBFCR_EL1.LASTFAILED set, indicate that all preceding
> + * consecutive branch records up to the last record, which were in a
> + * transaction (i.e their BRBINFx_EL1.TX set) have been aborted.
> + *
> + * --------------------------------- -------------------
> + * | 00 | BRBSRC | BRBTGT | BRBINF | | TX = 1 | LF = 0 | [TX success]
> + * --------------------------------- -------------------
> + * | 01 | BRBSRC | BRBTGT | BRBINF | | TX = 1 | LF = 0 | [TX success]
> + * --------------------------------- -------------------
> + * | 02 | BRBSRC | BRBTGT | BRBINF | | TX = 0 | LF = 0 |
> + * --------------------------------- -------------------
> + * | 03 | BRBSRC | BRBTGT | BRBINF | | TX = 1 | LF = 0 | [TX failed]
> + * --------------------------------- -------------------
> + * | 04 | BRBSRC | BRBTGT | BRBINF | | TX = 1 | LF = 0 | [TX failed]
> + * --------------------------------- -------------------
> + * | 05 | BRBSRC | BRBTGT | BRBINF | | TX = 0 | LF = 1 |
> + * --------------------------------- -------------------
> + * | .. | BRBSRC | BRBTGT | BRBINF | | TX = 0 | LF = 0 |
> + * --------------------------------- -------------------
> + * | 61 | BRBSRC | BRBTGT | BRBINF | | TX = 1 | LF = 0 | [TX failed]
> + * --------------------------------- -------------------
> + * | 62 | BRBSRC | BRBTGT | BRBINF | | TX = 1 | LF = 0 | [TX failed]
> + * --------------------------------- -------------------
> + * | 63 | BRBSRC | BRBTGT | BRBINF | | TX = 1 | LF = 0 | [TX failed]
> + * --------------------------------- -------------------
> + *
> + * BRBFCR_EL1.LASTFAILED == 1
> + *
> + * BRBFCR_EL1.LASTFAILED fails all those consecutive, in transaction
> + * branches records near the end of the BRBE buffer.
> + *
> + * Architecture does not guarantee a non transaction (TX = 0) branch
> + * record between two different transactions. So it is possible that
> + * a subsequent lastfailed record (TX = 0, LF = 1) might erroneously
> + * mark more than required transactions as aborted.
> + */
> +static void process_branch_aborts(struct pmu_hw_events *cpuc)
> +{
> + u64 brbfcr = read_sysreg_s(SYS_BRBFCR_EL1);
> + bool lastfailed = !!(brbfcr & BRBFCR_EL1_LASTFAILED);
> + int idx = brbe_get_numrec(cpuc->percpu_pmu->reg_brbidr) - 1;
> + struct perf_branch_entry *entry;
> +
> + do {
> + entry = &cpuc->branches->branch_entries[idx];
> + if (entry->in_tx) {
> + entry->abort = lastfailed;
> + } else {
> + lastfailed = entry->abort;
> + entry->abort = false;
> + }
> + } while (idx--, idx >= 0);
> +}
> +
> +void armv8pmu_branch_reset(void)
> +{
> + asm volatile(BRB_IALL);
> + isb();
> +}
> +
> +static bool capture_branch_entry(struct pmu_hw_events *cpuc,
> + struct perf_event *event, int idx)
> +{
> + struct perf_branch_entry *entry = &cpuc->branches->branch_entries[idx];
> + u64 brbinf = get_brbinf_reg(idx);
> +
> + /*
> + * There are no valid entries anymore on the buffer.
> + * Abort the branch record processing to save some
> + * cycles and also reduce the capture/process load
> + * for the user space as well.
> + */
> + if (brbe_invalid(brbinf))
> + return false;
> +
> + perf_clear_branch_entry_bitfields(entry);
> + if (brbe_record_is_complete(brbinf)) {
> + entry->from = get_brbsrc_reg(idx);
> + entry->to = get_brbtgt_reg(idx);
> + } else if (brbe_record_is_source_only(brbinf)) {
> + entry->from = get_brbsrc_reg(idx);
> + entry->to = 0;
> + } else if (brbe_record_is_target_only(brbinf)) {
> + entry->from = 0;
> + entry->to = get_brbtgt_reg(idx);
> + }
> + capture_brbe_flags(entry, event, brbinf);
> + return true;
> +}
> +
> +void armv8pmu_branch_read(struct pmu_hw_events *cpuc, struct perf_event *event)
> +{
> + int nr_hw_entries = brbe_get_numrec(cpuc->percpu_pmu->reg_brbidr);
> + u64 brbfcr, brbcr;
> + int idx = 0;
> +
> + brbcr = read_sysreg_s(SYS_BRBCR_EL1);
> + brbfcr = read_sysreg_s(SYS_BRBFCR_EL1);
> +
> + /* Ensure pause on PMU interrupt is enabled */
> + WARN_ON_ONCE(!(brbcr & BRBCR_EL1_FZP));
> +
> + /* Pause the buffer */
> + write_sysreg_s(brbfcr | BRBFCR_EL1_PAUSED, SYS_BRBFCR_EL1);
> + isb();
> +
> + /* Loop through bank 0 */
> + select_brbe_bank(BRBE_BANK_IDX_0);
> + while (idx < nr_hw_entries && idx <= BRBE_BANK0_IDX_MAX) {
> + if (!capture_branch_entry(cpuc, event, idx))
> + goto skip_bank_1;
> + idx++;
> + }
> +
> + /* Loop through bank 1 */
> + select_brbe_bank(BRBE_BANK_IDX_1);
> + while (idx < nr_hw_entries && idx <= BRBE_BANK1_IDX_MAX) {
> + if (!capture_branch_entry(cpuc, event, idx))
> + break;
> + idx++;
> + }
> +
> +skip_bank_1:
> + cpuc->branches->branch_stack.nr = idx;
> + cpuc->branches->branch_stack.hw_idx = -1ULL;
> + process_branch_aborts(cpuc);
> +
> + /* Unpause the buffer */
> + write_sysreg_s(brbfcr & ~BRBFCR_EL1_PAUSED, SYS_BRBFCR_EL1);
> + isb();
> + armv8pmu_branch_reset();
> +}
> diff --git a/drivers/perf/arm_brbe.h b/drivers/perf/arm_brbe.h
> new file mode 100644
> index 000000000000..a47480eec070
> --- /dev/null
> +++ b/drivers/perf/arm_brbe.h
> @@ -0,0 +1,257 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Branch Record Buffer Extension Helpers.
> + *
> + * Copyright (C) 2022 ARM Limited
> + *
> + * Author: Anshuman Khandual <anshuman.khandual@arm.com>
> + */
> +#define pr_fmt(fmt) "brbe: " fmt
> +
> +#include <linux/perf/arm_pmu.h>
> +
> +#define BRBFCR_EL1_BRANCH_FILTERS (BRBFCR_EL1_DIRECT | \
> + BRBFCR_EL1_INDIRECT | \
> + BRBFCR_EL1_RTN | \
> + BRBFCR_EL1_INDCALL | \
> + BRBFCR_EL1_DIRCALL | \
> + BRBFCR_EL1_CONDDIR)
> +
> +#define BRBFCR_EL1_DEFAULT_CONFIG (BRBFCR_EL1_BANK_MASK | \
> + BRBFCR_EL1_PAUSED | \
> + BRBFCR_EL1_EnI | \
> + BRBFCR_EL1_BRANCH_FILTERS)
> +
> +/*
> + * BRBTS_EL1 is currently not used for branch stack implementation
> + * purpose but BRBCR_EL1.TS needs to have a valid value from all
> + * available options. BRBCR_EL1_TS_VIRTUAL is selected for this.
> + */
> +#define BRBCR_EL1_DEFAULT_TS FIELD_PREP(BRBCR_EL1_TS_MASK, BRBCR_EL1_TS_VIRTUAL)
> +
> +#define BRBCR_EL1_DEFAULT_CONFIG (BRBCR_EL1_EXCEPTION | \
> + BRBCR_EL1_ERTN | \
> + BRBCR_EL1_CC | \
> + BRBCR_EL1_MPRED | \
> + BRBCR_EL1_E1BRE | \
> + BRBCR_EL1_E0BRE | \
> + BRBCR_EL1_FZP | \
> + BRBCR_EL1_DEFAULT_TS)
> +/*
> + * BRBE Instructions
> + *
> + * BRB_IALL : Invalidate the entire buffer
> + * BRB_INJ : Inject latest branch record derived from [BRBSRCINJ, BRBTGTINJ, BRBINFINJ]
> + */
> +#define BRB_IALL __emit_inst(0xD5000000 | sys_insn(1, 1, 7, 2, 4) | (0x1f))
> +#define BRB_INJ __emit_inst(0xD5000000 | sys_insn(1, 1, 7, 2, 5) | (0x1f))
> +
> +/*
> + * BRBE Buffer Organization
> + *
> + * BRBE buffer is arranged as multiple banks of 32 branch record
> + * entries each. An individual branch record in a given bank could
> + * be accessed, after selecting the bank in BRBFCR_EL1.BANK and
> + * accessing the registers i.e [BRBSRC, BRBTGT, BRBINF] set with
> + * indices [0..31].
> + *
> + * Bank 0
> + *
> + * --------------------------------- ------
> + * | 00 | BRBSRC | BRBTGT | BRBINF | | 00 |
> + * --------------------------------- ------
> + * | 01 | BRBSRC | BRBTGT | BRBINF | | 01 |
> + * --------------------------------- ------
> + * | .. | BRBSRC | BRBTGT | BRBINF | | .. |
> + * --------------------------------- ------
> + * | 31 | BRBSRC | BRBTGT | BRBINF | | 31 |
> + * --------------------------------- ------
> + *
> + * Bank 1
> + *
> + * --------------------------------- ------
> + * | 32 | BRBSRC | BRBTGT | BRBINF | | 00 |
> + * --------------------------------- ------
> + * | 33 | BRBSRC | BRBTGT | BRBINF | | 01 |
> + * --------------------------------- ------
> + * | .. | BRBSRC | BRBTGT | BRBINF | | .. |
> + * --------------------------------- ------
> + * | 63 | BRBSRC | BRBTGT | BRBINF | | 31 |
> + * --------------------------------- ------
> + */
> +#define BRBE_BANK_MAX_ENTRIES 32
> +
> +#define BRBE_BANK0_IDX_MIN 0
> +#define BRBE_BANK0_IDX_MAX 31
> +#define BRBE_BANK1_IDX_MIN 32
> +#define BRBE_BANK1_IDX_MAX 63
> +
> +struct brbe_hw_attr {
> + int brbe_version;
> + int brbe_cc;
> + int brbe_nr;
> + int brbe_format;
> +};
> +
> +enum brbe_bank_idx {
> + BRBE_BANK_IDX_INVALID = -1,
> + BRBE_BANK_IDX_0,
> + BRBE_BANK_IDX_1,
> + BRBE_BANK_IDX_MAX
> +};
> +
> +#define RETURN_READ_BRBSRCN(n) \
> + read_sysreg_s(SYS_BRBSRC##n##_EL1)
> +
> +#define RETURN_READ_BRBTGTN(n) \
> + read_sysreg_s(SYS_BRBTGT##n##_EL1)
> +
> +#define RETURN_READ_BRBINFN(n) \
> + read_sysreg_s(SYS_BRBINF##n##_EL1)
> +
> +#define BRBE_REGN_CASE(n, case_macro) \
> + case n: return case_macro(n); break
> +
> +#define BRBE_REGN_SWITCH(x, case_macro) \
> + do { \
> + switch (x) { \
> + BRBE_REGN_CASE(0, case_macro); \
> + BRBE_REGN_CASE(1, case_macro); \
> + BRBE_REGN_CASE(2, case_macro); \
> + BRBE_REGN_CASE(3, case_macro); \
> + BRBE_REGN_CASE(4, case_macro); \
> + BRBE_REGN_CASE(5, case_macro); \
> + BRBE_REGN_CASE(6, case_macro); \
> + BRBE_REGN_CASE(7, case_macro); \
> + BRBE_REGN_CASE(8, case_macro); \
> + BRBE_REGN_CASE(9, case_macro); \
> + BRBE_REGN_CASE(10, case_macro); \
> + BRBE_REGN_CASE(11, case_macro); \
> + BRBE_REGN_CASE(12, case_macro); \
> + BRBE_REGN_CASE(13, case_macro); \
> + BRBE_REGN_CASE(14, case_macro); \
> + BRBE_REGN_CASE(15, case_macro); \
> + BRBE_REGN_CASE(16, case_macro); \
> + BRBE_REGN_CASE(17, case_macro); \
> + BRBE_REGN_CASE(18, case_macro); \
> + BRBE_REGN_CASE(19, case_macro); \
> + BRBE_REGN_CASE(20, case_macro); \
> + BRBE_REGN_CASE(21, case_macro); \
> + BRBE_REGN_CASE(22, case_macro); \
> + BRBE_REGN_CASE(23, case_macro); \
> + BRBE_REGN_CASE(24, case_macro); \
> + BRBE_REGN_CASE(25, case_macro); \
> + BRBE_REGN_CASE(26, case_macro); \
> + BRBE_REGN_CASE(27, case_macro); \
> + BRBE_REGN_CASE(28, case_macro); \
> + BRBE_REGN_CASE(29, case_macro); \
> + BRBE_REGN_CASE(30, case_macro); \
> + BRBE_REGN_CASE(31, case_macro); \
> + default: \
> + pr_warn("unknown register index\n"); \
> + return -1; \
> + } \
> + } while (0)
> +
> +static inline int buffer_to_brbe_idx(int buffer_idx)
> +{
> + return buffer_idx % BRBE_BANK_MAX_ENTRIES;
> +}
> +
> +static inline u64 get_brbsrc_reg(int buffer_idx)
> +{
> + int brbe_idx = buffer_to_brbe_idx(buffer_idx);
> +
> + BRBE_REGN_SWITCH(brbe_idx, RETURN_READ_BRBSRCN);
> +}
> +
> +static inline u64 get_brbtgt_reg(int buffer_idx)
> +{
> + int brbe_idx = buffer_to_brbe_idx(buffer_idx);
> +
> + BRBE_REGN_SWITCH(brbe_idx, RETURN_READ_BRBTGTN);
> +}
> +
> +static inline u64 get_brbinf_reg(int buffer_idx)
> +{
> + int brbe_idx = buffer_to_brbe_idx(buffer_idx);
> +
> + BRBE_REGN_SWITCH(brbe_idx, RETURN_READ_BRBINFN);
> +}
> +
> +static inline u64 brbe_record_valid(u64 brbinf)
> +{
> + return FIELD_GET(BRBINFx_EL1_VALID_MASK, brbinf);
> +}
> +
> +static inline bool brbe_invalid(u64 brbinf)
> +{
> + return brbe_record_valid(brbinf) == BRBINFx_EL1_VALID_NONE;
> +}
> +
> +static inline bool brbe_record_is_complete(u64 brbinf)
> +{
> + return brbe_record_valid(brbinf) == BRBINFx_EL1_VALID_FULL;
> +}
> +
> +static inline bool brbe_record_is_source_only(u64 brbinf)
> +{
> + return brbe_record_valid(brbinf) == BRBINFx_EL1_VALID_SOURCE;
> +}
> +
> +static inline bool brbe_record_is_target_only(u64 brbinf)
> +{
> + return brbe_record_valid(brbinf) == BRBINFx_EL1_VALID_TARGET;
> +}
> +
> +static inline int brbe_get_in_tx(u64 brbinf)
> +{
> + return FIELD_GET(BRBINFx_EL1_T_MASK, brbinf);
> +}
> +
> +static inline int brbe_get_mispredict(u64 brbinf)
> +{
> + return FIELD_GET(BRBINFx_EL1_MPRED_MASK, brbinf);
> +}
> +
> +static inline int brbe_get_lastfailed(u64 brbinf)
> +{
> + return FIELD_GET(BRBINFx_EL1_LASTFAILED_MASK, brbinf);
> +}
> +
> +static inline int brbe_get_cycles(u64 brbinf)
> +{
> + /*
> + * Captured cycle count is unknown and hence
> + * should not be passed on to the user space.
> + */
> + if (brbinf & BRBINFx_EL1_CCU)
> + return 0;
> +
> + return FIELD_GET(BRBINFx_EL1_CC_MASK, brbinf);
> +}
> +
> +static inline int brbe_get_type(u64 brbinf)
> +{
> + return FIELD_GET(BRBINFx_EL1_TYPE_MASK, brbinf);
> +}
> +
> +static inline int brbe_get_el(u64 brbinf)
> +{
> + return FIELD_GET(BRBINFx_EL1_EL_MASK, brbinf);
> +}
> +
> +static inline int brbe_get_numrec(u64 brbidr)
> +{
> + return FIELD_GET(BRBIDR0_EL1_NUMREC_MASK, brbidr);
> +}
> +
> +static inline int brbe_get_format(u64 brbidr)
> +{
> + return FIELD_GET(BRBIDR0_EL1_FORMAT_MASK, brbidr);
> +}
> +
> +static inline int brbe_get_cc_bits(u64 brbidr)
> +{
> + return FIELD_GET(BRBIDR0_EL1_CC_MASK, brbidr);
> +}
> diff --git a/drivers/perf/arm_pmuv3.c b/drivers/perf/arm_pmuv3.c
> index 10bbe02f4079..7c9e9045c24e 100644
> --- a/drivers/perf/arm_pmuv3.c
> +++ b/drivers/perf/arm_pmuv3.c
> @@ -813,6 +813,10 @@ static irqreturn_t armv8pmu_handle_irq(struct arm_pmu *cpu_pmu)
> if (!armpmu_event_set_period(event))
> continue;
>
> + /*
> + * PMU IRQ should remain asserted until all branch records
> + * are captured and processed into struct perf_sample_data.
> + */
> if (has_branch_stack(event) && !WARN_ON(!cpuc->branches)) {
> armv8pmu_branch_read(cpuc, event);
> perf_sample_save_brstack(&data, event, &cpuc->branches->branch_stack);

\
 
 \ /
  Last update: 2023-07-25 09:14    [W:0.609 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site