lkml.org 
[lkml]   [2023]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 6.1 08/34] thunderbolt: Read retimer NVM authentication status prior tb_retimer_set_inbound_sbtx()
Date
From: Mika Westerberg <mika.westerberg@linux.intel.com>

[ Upstream commit 1402ba08abae5cfa583ff1a40b99c098a0532d41 ]

According to the USB4 retimer guide the correct order is immediately
after sending ENUMERATE_RETIMERS so update the code to follow this.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/thunderbolt/retimer.c | 29 +++++++++++++++++++++--------
1 file changed, 21 insertions(+), 8 deletions(-)

diff --git a/drivers/thunderbolt/retimer.c b/drivers/thunderbolt/retimer.c
index 9cc28197dbc45..edbd92435b41a 100644
--- a/drivers/thunderbolt/retimer.c
+++ b/drivers/thunderbolt/retimer.c
@@ -187,6 +187,21 @@ static ssize_t nvm_authenticate_show(struct device *dev,
return ret;
}

+static void tb_retimer_nvm_authenticate_status(struct tb_port *port, u32 *status)
+{
+ int i;
+
+ tb_port_dbg(port, "reading NVM authentication status of retimers\n");
+
+ /*
+ * Before doing anything else, read the authentication status.
+ * If the retimer has it set, store it for the new retimer
+ * device instance.
+ */
+ for (i = 1; i <= TB_MAX_RETIMER_INDEX; i++)
+ usb4_port_retimer_nvm_authenticate_status(port, i, &status[i]);
+}
+
static void tb_retimer_set_inbound_sbtx(struct tb_port *port)
{
int i;
@@ -455,18 +470,16 @@ int tb_retimer_scan(struct tb_port *port, bool add)
return ret;

/*
- * Enable sideband channel for each retimer. We can do this
- * regardless whether there is device connected or not.
+ * Immediately after sending enumerate retimers read the
+ * authentication status of each retimer.
*/
- tb_retimer_set_inbound_sbtx(port);
+ tb_retimer_nvm_authenticate_status(port, status);

/*
- * Before doing anything else, read the authentication status.
- * If the retimer has it set, store it for the new retimer
- * device instance.
+ * Enable sideband channel for each retimer. We can do this
+ * regardless whether there is device connected or not.
*/
- for (i = 1; i <= TB_MAX_RETIMER_INDEX; i++)
- usb4_port_retimer_nvm_authenticate_status(port, i, &status[i]);
+ tb_retimer_set_inbound_sbtx(port);

for (i = 1; i <= TB_MAX_RETIMER_INDEX; i++) {
/*
--
2.39.2
\
 
 \ /
  Last update: 2023-07-24 03:41    [W:0.303 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site