lkml.org 
[lkml]   [2023]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 5.10 06/22] ARM: dts: imx6dl: prtrvt, prtvt7, prti6q, prtwd2: fix USB related warnings
Date
From: Oleksij Rempel <o.rempel@pengutronix.de>

[ Upstream commit 1d14bd943fa2bbdfda1efbcc080b298fed5f1803 ]

Fix USB-related warnings in prtrvt, prtvt7, prti6q and prtwd2 device trees
by disabling unused usbphynop1 and usbphynop2 USB PHYs and providing proper
configuration for the over-current detection. This fixes the following
warnings with the current kernel:
usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests
usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests
imx_usb 2184200.usb: No over current polarity defined

By the way, fix over-current detection on usbotg port for prtvt7, prti6q
and prtwd2 boards. Only prtrvt do not have OC on USB OTG port.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/imx6dl-prtrvt.dts | 4 ++++
arch/arm/boot/dts/imx6qdl-prti6q.dtsi | 11 ++++++++++-
2 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6dl-prtrvt.dts b/arch/arm/boot/dts/imx6dl-prtrvt.dts
index 5ac84445e9cc1..90e01de8c2c15 100644
--- a/arch/arm/boot/dts/imx6dl-prtrvt.dts
+++ b/arch/arm/boot/dts/imx6dl-prtrvt.dts
@@ -126,6 +126,10 @@
status = "disabled";
};

+&usbotg {
+ disable-over-current;
+};
+
&vpu {
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
index 19578f660b092..70dfa07a16981 100644
--- a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
@@ -69,6 +69,7 @@
vbus-supply = <&reg_usb_h1_vbus>;
phy_type = "utmi";
dr_mode = "host";
+ disable-over-current;
status = "okay";
};

@@ -78,10 +79,18 @@
pinctrl-0 = <&pinctrl_usbotg>;
phy_type = "utmi";
dr_mode = "host";
- disable-over-current;
+ over-current-active-low;
status = "okay";
};

+&usbphynop1 {
+ status = "disabled";
+};
+
+&usbphynop2 {
+ status = "disabled";
+};
+
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
--
2.39.2
\
 
 \ /
  Last update: 2023-07-24 03:30    [W:0.122 / U:0.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site