lkml.org 
[lkml]   [2023]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH v4 13/17] drm/msm/dsi: Reuse QCM2290 14nm DSI PHY configuration for SM6125
SM6125 features only a single PHY (despite a secondary PHY PLL source
being available to the disp_cc_mdss_pclk0_clk_src clock), and downstream
sources for this "trinket" SoC do not define the typical "vcca"
regulator to be available nor used. This, including the register offset
is identical to QCM2290, whose config struct can trivially be reused.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index 323498237ef4..f59cf2a47b4c 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -561,6 +561,8 @@ static const struct of_device_id dsi_phy_dt_match[] = {
.data = &dsi_phy_14nm_660_cfgs },
{ .compatible = "qcom,dsi-phy-14nm-8953",
.data = &dsi_phy_14nm_8953_cfgs },
+ { .compatible = "qcom,sm6125-dsi-phy-14nm",
+ .data = &dsi_phy_14nm_2290_cfgs },
#endif
#ifdef CONFIG_DRM_MSM_DSI_10NM_PHY
{ .compatible = "qcom,dsi-phy-10nm",
--
2.41.0

\
 
 \ /
  Last update: 2023-07-23 18:10    [W:0.222 / U:1.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site