Messages in this thread | | | Date | Sat, 22 Jul 2023 14:07:43 -0400 | From | Hugo Villeneuve <> | Subject | Re: [PATCH] auxdisplay: hd44780: move cursor home after clear display command |
| |
On Sat, 22 Jul 2023 18:04:03 +0200 Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> wrote:
> On Sat, Jul 22, 2023 at 4:54 PM David Reaver <me@davidreaver.com> wrote: > > > > I was actually hooking up a 16x2 HD44780 on my BeagleBone Black last > > night before I came across this patch, so I was able to test this. It > > works fine for me. I tested with: > > > > $ printf '\f' > /dev/lcd > > $ printf 'Hello\nWorld!\n' > /dev/lcd > > $ printf '\x1b[LR' > /dev/lcd > > $ printf '\x1b[LR' > /dev/lcd > > $ printf '\x1b[LR' > /dev/lcd > > $ printf '\f' > /dev/lcd > > $ printf 'Goodbye\nWorld!\n' > /dev/lcd > > > > As expected, "Goodbye World!" was correctly placed left-aligned on the > > display, split over both lines. Let me know if there is something else > > you would like me to do to test this! > > > > Tested-by: David Reaver <me@davidreaver.com> > > Thanks a lot, that is very helpful! > > I will wait a while in case Christian or somebody else wants to test > it, and send it for 6.6.
Hi Miguel, in the meantime, I will send V2 of the patch with the changes you suggested for the commit message and the comments.
Hugo.
| |