lkml.org 
[lkml]   [2023]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 1/2] net: sfp: add quirk for FS's 2.5G copper SFP
Date
Add a quirk for a copper SFP that identifies itself as "FS" "SFP-2.5G-T".
This module's PHY is inaccessible, and can only run at 2500base-X with the
host without negotiation. Add a quirk to enable the 2500base-X interface mode
with 2500base-T support and disable auto negotiation.

Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
---
drivers/net/phy/sfp.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index d855a18308d7..ee049efdf71b 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -463,6 +463,9 @@ static const struct sfp_quirk sfp_quirks[] = {
SFP_QUIRK("HUAWEI", "MA5671A", sfp_quirk_2500basex,
sfp_fixup_ignore_tx_fault),

+ // FS 2.5G Base-T
+ SFP_QUIRK_M("FS", "SFP-2.5G-T", sfp_quirk_oem_2_5g),
+
// Lantech 8330-262D-E can operate at 2500base-X, but incorrectly report
// 2500MBd NRZ in their EEPROM
SFP_QUIRK_M("Lantech", "8330-262D-E", sfp_quirk_2500basex),
--
2.25.1
\
 
 \ /
  Last update: 2023-07-21 08:03    [W:0.215 / U:1.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site