Messages in this thread Patch in this message | | | From | Stefan Riedmüller <> | Subject | Re: [PATCH v2 1/3] ARM: dts: imx6: phytec: fix RTC interrupt level | Date | Wed, 19 Jul 2023 11:49:41 +0000 |
| |
Hi Andrej,
On Wed, 2023-07-19 at 13:43 +0200, Andrej Picej wrote: > RTC interrupt level should be set to "LOW". This was revealed by the > introduction of commit: > > f181987ef477 ("rtc: m41t80: use IRQ flags obtained from fwnode") > > which changed the way IRQ type is obtained. > > Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Reviewed-by: Stefan Riedmüller <s.riedmueller@phytec.de>
> --- > Changes in v2: > - no changes > --- > arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi > b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi > index 1a599c294ab8..1ca4d219609f 100644 > --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi > +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi > @@ -182,7 +182,7 @@ i2c_rtc: rtc@68 { > pinctrl-0 = <&pinctrl_rtc_int>; > reg = <0x68>; > interrupt-parent = <&gpio7>; > - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; > + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; > status = "disabled"; > }; > };
| |