lkml.org 
[lkml]   [2023]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH v3 0/3] support 512B ECC step size for Meson NAND
Hi Arseniy,

avkrasnov@sberdevices.ru wrote on Sat, 15 Jul 2023 20:48:34 +0300:

> Hello Miquel!
>
> On 15.07.2023 19:15, Miquel Raynal wrote:
> > Hi Arseniy,
> >
> > AVKrasnov@sberdevices.ru wrote on Tue, 11 Jul 2023 15:21:26 +0300:
> >
> >> Hello,
> >>
> >> this patchset adds support for 512B ECC step size for Meson NAND. Current
> >> implementation only supports 1024B. There are three patches:
> >>
> >> 1) Update for device tree bindings to replace 'const' type of field
> >> 'nand-ecc-step-size' with 'enum' which contains 512 and 1024.
> >>
> >> 2) Update for device tree bindings to add dependency between properties
> >> 'nand-ecc-strength' and 'nand-ecc-step-size'.
> >>
> >> 3) Update for Meson driver - new enum value for 512B ECC and reworked
> >> ECC capabilities structure to support both 512B and 1024B ECC. By
> >> default this driver uses 1024B ECC, 512B could be enabled in device
> >> tree.
> >
> > This series does not apply correctly on nand/next, would you mind
> > rebasing (nand/next on linux-mtd) and sending it again?
>
> Sure, as I see 0001 was applied to nand/next, so I can resend only 0002 and 0003,
> as 0002 is the first patch which fails to apply?

Yes indeed.

>
> >
> > BTW the "rfc" prefix is only needed for the "first" submission, when
> > you try something "new", otherwise it is no longer required.
>
> Ok, got it
>
> >
> > Thanks,
> > Miquèl
>
> Thanks, Arseniy


Thanks,
Miquèl

\
 
 \ /
  Last update: 2023-07-16 20:53    [W:0.034 / U:0.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site