lkml.org 
[lkml]   [2023]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] arm64: dts: imx8mm-venice-gw7904: enable UART1 hardware flow control
On Tue, Jun 06, 2023 at 08:38:19AM -0700, Tim Harvey wrote:
> On the GW7904 uart1 can use UART3_TX/RX for hardware flow control
> which was the desired default configuration. Remove uart3 and configure
> uart1 for hardware flow control.
>
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>

Applied, thanks!

\
 
 \ /
  Last update: 2023-07-17 02:15    [W:0.048 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site