lkml.org 
[lkml]   [2023]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Backporting commits for generating rpi dtb symbols to stable
On Sunday 16 July 2023 21:47:54 Aurelien Jarno wrote:
> Hi,
>
> On 2023-07-16 18:24, Pali Rohár wrote:
> > Hello,
> >
> > I see that raspberry pi bootloader throws ton of warnings when supplied
> > DTB file does not contain /__symbols__/ node.
> >
> > On RPI 1B rev1 it looks like this:
> >
> > dterror: no symbols found
> > dterror: no symbols found
> > dterror: no symbols found
> > dterror: no symbols found
> > dterror: no symbols found
> > dterror: no symbols found
> > dterror: no symbols found
> > dterror: no symbols found
> > dterror: no symbols found
> > dterror: no symbols found
>
> Do you have those errors with the default configuration? On a RPI 4,
> this only happens when setting uart_2ndstage to 1 in config.txt.
> According to the documentation, this option enables diagnostic
> information from the main firmware.

Yes, I have it with default configuration. And I really do not know why
it is happening, I just described observations and that dtc -@ fixes
this issue. Note that this is about 1b rev1 (the first revision); so the
older HW, so maybe this can be a reason?

> Unless this is different on RPI 1B, this means we are talking about a
> warning that happens when enabling diagnostic information, so I am not
> sure it warrants a change to stable kernels.

Well, that is why I asked, if it is something for stable or not.

> Regards
> Aurelien
>
> --
> Aurelien Jarno GPG: 4096R/1DDD8C9B
> aurelien@aurel32.net http://aurel32.net

\
 
 \ /
  Last update: 2023-07-16 21:56    [W:0.048 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site