lkml.org 
[lkml]   [2023]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
From


On 7/14/2023 2:30 PM, Johan Hovold wrote:
> On Mon, Jul 03, 2023 at 12:35:48AM +0530, Krishna Kurapati PSSNV wrote:
>> On 6/27/2023 9:13 PM, Johan Hovold wrote:
>>> On Wed, Jun 07, 2023 at 02:16:37PM +0200, Johan Hovold wrote:
>>>> On Sun, May 14, 2023 at 11:19:14AM +0530, Krishna Kurapati wrote:
>
>>>>> - val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG);
>>>>> - if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
>>>>> - dev_err(qcom->dev, "HS-PHY not in L2\n");
>>>>> + for (i = 0; i < dwc->num_usb2_ports; i++) {
>>>>> + val = readl(qcom->qscratch_base + pwr_evnt_irq_stat_reg_offset[i]);
>>>>> + if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
>>>>> + dev_err(qcom->dev, "HS-PHY%d not in L2\n", i);
>>>>> + }
>>>
>>>> When testing this on the X13s I get:
>>>>
>>>> dwc3-qcom a4f8800.usb: HS-PHY2 not in L2
>>>>
>>>> for the third port, whose status registers always seems to return zero
>>>> (e.g. as if we're checking the wrong register?):
>>>>
>>>> dwc3-qcom a4f8800.usb: dwc3_qcom_suspend - phy 0, pwr_event_stat = 38103c
>>>> dwc3-qcom a4f8800.usb: dwc3_qcom_suspend - phy 1, pwr_event_stat = 38103c
>>>> dwc3-qcom a4f8800.usb: dwc3_qcom_suspend - phy 2, pwr_event_stat = 00
>>>> dwc3-qcom a4f8800.usb: dwc3_qcom_suspend - phy 3, pwr_event_stat = 140030
>>>>
>>>> I verified that everything appears to work as expected on sa8295p-adp.
>>>>
>>>> Do you have any idea of what may be causing this?
>>>
>>> You never replied to this; do you have any idea why the status register
>>> for the second port seemingly always read back as 0 on the X13s?
>
>> Missed this mail. This never popped up on my system. So no idea what
>> is different in Lenovo X13s. Might need to check with team internally.
>
> Did you hear anything back regarding the above?
>
> Could it even be that the register offset it not correct for sc8280xp?
>

Hi Johan,

No. I rechecked the register offsets and they are proper. (same as what
we are using in downstream).

Adding Jack and Wesley to help with any suggestions here.

Regards,
Krishna,

\
 
 \ /
  Last update: 2023-07-16 20:50    [W:0.213 / U:0.472 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site