lkml.org 
[lkml]   [2023]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v2 0/6] net: phy: at803x: support qca8081 1G version chip
    Date
    This patch series add supporting qca8081 1G version chip, the 1G version
    chip can be identified by the register mmd7.0x901d bit0.

    In addition, qca8081 does not support 1000BaseX mode and the sgmii fifo
    reset is added on the link changed, which assert the fifo on the link
    down, deassert the fifo on the link up.

    Changes in v1:
    * switch to use genphy_c45_pma_read_abilities.
    * remove the patch [remove 1000BaseX mode of qca8081].
    * move the sgmii fifo reset to link_change_notify.

    Changes in v2:
    * split the qca8081 1G chip support patch.
    * improve the slave seed config, disable it if master preferred.

    Luo Jie (6):
    net: phy: at803x: support qca8081 genphy_c45_pma_read_abilities
    net: phy: at803x: merge qca8081 salve seed function
    net: phy: at803x: enable qca8081 slave seed conditionally
    net: phy: at803x: support qca8081 1G chip type
    net: phy: at803x: remove qca8081 1G fast retrain and slave seed config
    net: phy: at803x: add qca8081 fifo reset on the link changed

    drivers/net/phy/at803x.c | 132 +++++++++++++++++++++++++++------------
    1 file changed, 91 insertions(+), 41 deletions(-)


    base-commit: def3833fc6022c7f23bd4fd66ba5ed65c6b23272
    --
    2.17.1

    \
     
     \ /
      Last update: 2023-07-16 20:47    [W:4.158 / U:0.024 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site