lkml.org 
[lkml]   [2023]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v7 0/3] PCI: qcom: ep: Add basic interconnect support
From
Hi All,

A gentle ping.


Thanks,

KC

On 6/30/2023 9:55 AM, Krishna chaitanya chundru wrote:
> Add basic support for managing "pcie-mem" interconnect path by setting
> a low constraint before enabling clocks and updating it after the link
> is up based on link speed and width the device got enumerated.
>
> chnages from v6:
> - addressed the comments as suggested by mani.
> changes from v5:
> - addressed the comments by mani.
> changes from v4:
> - rebased with linux-next.
> - Added comments as suggested by mani.
> - removed the arm: dts: qcom: sdx55: Add interconnect path
> as that patch is already applied.
> changes from v3:
> - ran make DT_CHECKER_FLAGS=-m dt_binding_check and fixed
> errors.
> - Added macros in the qcom ep driver patch as suggested by Dmitry
> changes from v2:
> - changed the logic for getting speed and width as suggested
> by bjorn.
> - fixed compilation errors.
>
>
> Krishna chaitanya chundru (3):
> dt-bindings: PCI: qcom: ep: Add interconnects path
> arm: dts: qcom: sdx65: Add PCIe interconnect path
> PCI: qcom-ep: Add ICC bandwidth voting support
>
> .../devicetree/bindings/pci/qcom,pcie-ep.yaml | 13 ++++
> arch/arm/boot/dts/qcom/qcom-sdx65.dtsi | 3 +
> drivers/pci/controller/dwc/pcie-qcom-ep.c | 71 ++++++++++++++++++++++
> 3 files changed, 87 insertions(+)
>

\
 
 \ /
  Last update: 2023-07-12 07:09    [W:0.079 / U:0.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site