lkml.org 
[lkml]   [2023]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v2 1/3] net: stmmac: dwmac-qcom-ethqos: Use of_get_phy_mode() over device_get_phy_mode()
Date
Since this driver only uses devicetree, let's move over to
of_get_phy_mode(). That API has an explicit error return and produces a
phy_interface_t directly instead of an int when representing the phy
mode.

Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
---

Changes since v1:
* Convert to using of_get_phy_mode() instead of continuing to use
device_get_phy_mode() (Andrew Lunn)

.../net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index e62940414e54..ebafdadb28d5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -4,10 +4,10 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/of_net.h>
#include <linux/platform_device.h>
#include <linux/phy.h>
#include <linux/phy/phy.h>
-#include <linux/property.h>

#include "stmmac.h"
#include "stmmac_platform.h"
@@ -104,7 +104,7 @@ struct qcom_ethqos {
struct clk *link_clk;
struct phy *serdes_phy;
unsigned int speed;
- int phy_mode;
+ phy_interface_t phy_mode;

const struct ethqos_emac_por *por;
unsigned int num_por;
@@ -720,7 +720,9 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
if (!ethqos)
return -ENOMEM;

- ethqos->phy_mode = device_get_phy_mode(dev);
+ ret = of_get_phy_mode(np, &ethqos->phy_mode);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to get phy mode\n");
switch (ethqos->phy_mode) {
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_ID:
@@ -731,8 +733,6 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
case PHY_INTERFACE_MODE_SGMII:
ethqos->configure_func = ethqos_configure_sgmii;
break;
- case -ENODEV:
- return -ENODEV;
default:
return -EINVAL;
}
--
2.41.0
\
 
 \ /
  Last update: 2023-07-10 22:19    [W:0.054 / U:1.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site