lkml.org 
[lkml]   [2023]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 1/3] dt-bindings: qspi: cdns,qspi-nor: Add clocks for StarFive JH7110 SoC
From


On 2023/6/3 2:02, Conor Dooley wrote:
> On Fri, Jun 02, 2023 at 04:49:23PM +0800, William Qiu wrote:
>> The QSPI controller needs three clock items to work properly on StarFive
>> JH7110 SoC, so there is need to change the maxItems's value to 3. Other
>> platforms do not have this constraint.
>>
>> Signed-off-by: William Qiu <william.qiu@starfivetech.com>
>> Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
>> ---
>> .../devicetree/bindings/spi/cdns,qspi-nor.yaml | 15 ++++++++++++---
>> 1 file changed, 12 insertions(+), 3 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
>> index b310069762dd..b6a27171d965 100644
>> --- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
>> +++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
>> @@ -26,6 +26,15 @@ allOf:
>> const: starfive,jh7110-qspi
>> then:
>> properties:
>> + clocks:
>> + maxItems: 3
>> +
>> + clock-names:
>> + items:
>> + - const: ref_clk
>
> Aww, I liked Mark's suggestions better.
> If you are respinning to fix the LKP reported issue w/ ignoring the result
> of enabling the clocks, could you chop the _clk off of this one?
>
> Otherwise,
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
>
> Thanks,
> Conor.

Hi Conor,

Thanks for taking time to review this patch series.
About the clock name, I would take Mark's suggestions, and will update it in
next version.

Best regards,
William

\
 
 \ /
  Last update: 2023-06-06 05:34    [W:0.080 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site