lkml.org 
[lkml]   [2023]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] s390/net: lcs: fix build errors when FDDI is a loadable module
On Thu, Jun 22, 2023 at 09:15:24AM +0200, Alexandra Winter wrote:
>
>
> On 21.06.23 23:37, Randy Dunlap wrote:
> > Require FDDI to be built-in if it is used. LCS needs FDDI to be
> > built-in to build without errors.
> >
> > Prevents these build errors:
> > s390-linux-ld: drivers/s390/net/lcs.o: in function `lcs_new_device':
> > drivers/s390/net/lcs.c:2150: undefined reference to `fddi_type_trans'
> > s390-linux-ld: drivers/s390/net/lcs.c:2151: undefined reference to `alloc_fddidev'
> >
> > This FDDI requirement effectively restores the previous condition
> > before the blamed patch, when #ifdef CONFIG_FDDI was used, without
> > testing for CONFIG_FDDI_MODULE.
> >
> > Fixes: 128272336120 ("s390/net: lcs: use IS_ENABLED() for kconfig detection")
> > Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> > Reported-by: kernel test robot <lkp@intel.com>
> > Link: lore.kernel.org/r/202306202129.pl0AqK8G-lkp@intel.com
> > Suggested-by: Simon Horman <simon.horman@corigine.com>
> > Cc: Alexandra Winter <wintera@linux.ibm.com>
> > Cc: Wenjia Zhang <wenjia@linux.ibm.com>
> > Cc: linux-s390@vger.kernel.org
> > Cc: netdev@vger.kernel.org
> > Cc: Heiko Carstens <hca@linux.ibm.com>
> > Cc: Vasily Gorbik <gor@linux.ibm.com>
> > Cc: Alexander Gordeev <agordeev@linux.ibm.com>
> > Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
> > Cc: Sven Schnelle <svens@linux.ibm.com>
> > Cc: David S. Miller <davem@davemloft.net>
> > Cc: Eric Dumazet <edumazet@google.com>
> > Cc: Jakub Kicinski <kuba@kernel.org>
> > Cc: Paolo Abeni <pabeni@redhat.com>
> > ---
> > drivers/s390/net/Kconfig | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> > diff -- a/drivers/s390/net/Kconfig b/drivers/s390/net/Kconfig
> > --- a/drivers/s390/net/Kconfig
> > +++ b/drivers/s390/net/Kconfig
> > @@ -6,11 +6,13 @@ config LCS
> > def_tristate m
> > prompt "Lan Channel Station Interface"
> > depends on CCW && NETDEVICES && (ETHERNET || FDDI)
> > + depends on FDDI=y || FDDI=n
> > help
> > Select this option if you want to use LCS networking on IBM System z.
> > This device driver supports FDDI (IEEE 802.7) and Ethernet.
> > To compile as a module, choose M. The module name is lcs.
> > If you do not know what it is, it's safe to choose Y.
> > + If FDDI is used, it must be built-in (=y).
> >
> > config CTCM
> > def_tristate m
> >
>
>
> Wow Randy and Simon, you are reacting faster than I was able to evaluate this yesterday.
> 2 thoughts:
>
> 1) As ETHERNET cannot be a module and this patch prevents FDDI from being a module, then
> 128272336120 ("s390/net: lcs: use IS_ENABLED() for kconfig detection")
> is kind of pointless and can as well be reverted instead of doing this fix.
> Or am I missing something?

I'll leave that one to Randy at this point.

> 2) I wonder whether
>
> depends on CCW && NETDEVICES && (ETHERNET || FDDI)
> + depends on FDDI || FDDI=n
>
> would do what we want here:
> When FDDI is a loadable module, LCS mustn't be built-in.
>
> I will do some experiments and let you know.

It does seem to on my side.
But checking would be much appreciated.

\
 
 \ /
  Last update: 2023-06-22 09:54    [W:0.122 / U:0.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site