lkml.org 
[lkml]   [2023]   [Jun]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [PATCH v3 5/6] media: mediatek: vcodec: Read HW active status from syscon on MT8183
From
Il 20/06/23 02:03, Nícolas F. R. A. Prado ha scritto:
> Remove the requirement of a VDEC_SYS reg iospace for MT8183. To achieve
> that, rely on a vdecsys syscon to be passed through the DT, and use it
> to directly read the VDEC_HW_ACTIVE bit during IRQ handling to check
> whether the HW is active.
>
> The old behavior is still present when reg-names aren't supplied, as
> MT8173 still relies on it.
>
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
>
> ---
> I dropped the tags from this commit since a syscon is now used instead
> of an extra clock.
>
> Changes in v3:
> - Switched handling of VDEC_HW_ACTIVE to use a syscon instead of the
> 'active' clock
> - Reworded commit
> - Removed changes to subdev part of driver, since they aren't used by
> MT8183
>
> .../mediatek/vcodec/mtk_vcodec_dec_drv.c | 71 ++++++++++++++++---
> .../platform/mediatek/vcodec/mtk_vcodec_drv.h | 1 +
> 2 files changed, 61 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec_drv.c b/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec_drv.c
> index 83780d29a9cf..387ed26d6d5d 100644
> --- a/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec_drv.c
> +++ b/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec_drv.c
> @@ -8,10 +8,12 @@
> #include <linux/slab.h>
> #include <linux/interrupt.h>
> #include <linux/irq.h>
> +#include <linux/mfd/syscon.h>
> #include <linux/module.h>
> #include <linux/of_device.h>
> #include <linux/of.h>
> #include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> #include <media/v4l2-event.h>
> #include <media/v4l2-mem2mem.h>
> #include <media/videobuf2-dma-contig.h>
> @@ -38,22 +40,37 @@ static int mtk_vcodec_get_hw_count(struct mtk_vcodec_dev *dev)
> }
> }
>
> +static bool mtk_vcodec_is_hw_active(struct mtk_vcodec_dev *dev)
> +{
> + u32 cg_status = 0;
> + int val, ret;
> +
> + if (!dev->reg_base[VDEC_SYS]) {
> + ret = regmap_read(dev->vdecsys_regmap, VDEC_HW_ACTIVE_ADDR, &val);
> + if (ret) {
> + mtk_v4l2_err("Failed to read VDEC active status");
> + return false;
> + }
> +
> + return (val & VDEC_HW_ACTIVE_MASK) == 0;
> + }
> +
> + cg_status = readl(dev->reg_base[VDEC_SYS] + VDEC_HW_ACTIVE_ADDR);
> + return (cg_status & VDEC_HW_ACTIVE_MASK) == 0;

You can either do...

{
if (dev->vdecsys_regmap) {
ret = regmap_read(......., &cg_status);
if (ret) {
mtk_v4l2_err(...)
return false;
}
} else {
cg_status = readl(....)
}
return !FIELD_GET(VDEC_HW_ACTIVE_MASK, cg_status);
}

.... or ....

{
if (dev->vdecsys_regmap)
return !regmap_test_bits(dev->vdecsys_regmap, VDEC_HW_ACTIVE_ADDR,
VDEC_HW_ACTIVE_MASK);

cg_status = readl(....);
return !FIELD_GET(VDEC_HW_ACTIVE_MASK, cg_status);
}

That's way cleaner :-)

> +}
> +
> static irqreturn_t mtk_vcodec_dec_irq_handler(int irq, void *priv)
> {
> struct mtk_vcodec_dev *dev = priv;
> struct mtk_vcodec_ctx *ctx;
> - u32 cg_status = 0;
> unsigned int dec_done_status = 0;
> void __iomem *vdec_misc_addr = dev->reg_base[VDEC_MISC] +
> VDEC_IRQ_CFG_REG;
>
> ctx = mtk_vcodec_get_curr_ctx(dev, MTK_VDEC_CORE);
>
> - /* check if HW active or not */
> - cg_status = readl(dev->reg_base[0] + VDEC_HW_ACTIVE_ADDR);
> - if ((cg_status & VDEC_HW_ACTIVE_MASK) != 0) {
> - mtk_v4l2_err("DEC ISR, VDEC active is not 0x0 (0x%08x)",
> - cg_status);
> + if (!mtk_vcodec_is_hw_active(dev)) {
> + mtk_v4l2_err("DEC ISR, VDEC active is not 0x0");
> return IRQ_HANDLED;
> }
>
> @@ -82,6 +99,25 @@ static int mtk_vcodec_get_reg_bases(struct mtk_vcodec_dev *dev)
> {
> struct platform_device *pdev = dev->plat_dev;
> int reg_num, i;
> + struct resource *res;
> + bool no_vdecsys_reg = false;

bool has_vdecsys_reg;

> + static const char * const mtk_dec_reg_names[] = {
> + "misc",
> + "ld",
> + "top",
> + "cm",
> + "ad",
> + "av",
> + "pp",
> + "hwd",
> + "hwq",
> + "hwb",
> + "hwg"
> + };
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "misc");


/*
* If we have reg-names in devicetree, this means that we're on a new
* register organization, which implies that the VDEC_SYS iospace gets
* R/W through a syscon (regmap).
* Here we try to get the "misc" iostart only to check if we have reg-names
*/
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "misc");
if (res)
has_vdecsys_reg = false;
else
has_vdecsys_reg = true;

> + if (res)
> + no_vdecsys_reg = true;
>
> /* Sizeof(u32) * 4 bytes for each register base. */
> reg_num = of_property_count_elems_of_size(pdev->dev.of_node, "reg",
> @@ -91,12 +127,22 @@ static int mtk_vcodec_get_reg_bases(struct mtk_vcodec_dev *dev)
> return -EINVAL;
> }
>
> - for (i = 0; i < reg_num; i++) {
> - dev->reg_base[i] = devm_platform_ioremap_resource(pdev, i);
> - if (IS_ERR(dev->reg_base[i]))
> - return PTR_ERR(dev->reg_base[i]);
> + if (!no_vdecsys_reg) {

...so here you invert the branch

if (has_vdecsys_reg) {
.... byname ioremap ....
parse syscon regmap here, not later!
} else {
.... by id ioremap ....
}

> + for (i = 0; i < reg_num; i++) {
> + dev->reg_base[i] = devm_platform_ioremap_resource(pdev, i);
> + if (IS_ERR(dev->reg_base[i]))
> + return PTR_ERR(dev->reg_base[i]);
> +
> + mtk_v4l2_debug(2, "reg[%d] base=%p", i, dev->reg_base[i]);
> + }
> + } else {
> + for (i = 0; i < reg_num; i++) {
> + dev->reg_base[i+1] = devm_platform_ioremap_resource_byname(pdev, mtk_dec_reg_names[i]);
> + if (IS_ERR(dev->reg_base[i+1]))
> + return PTR_ERR(dev->reg_base[i+1]);
>
> - mtk_v4l2_debug(2, "reg[%d] base=%p", i, dev->reg_base[i]);
> + mtk_v4l2_debug(2, "reg[%d] base=%p", i+1, dev->reg_base[i+1]);
> + }
> }
>
> return 0;
> @@ -118,6 +164,9 @@ static int mtk_vcodec_init_dec_resources(struct mtk_vcodec_dev *dev)
> if (dev->dec_irq < 0)
> return dev->dec_irq;
>
> + dev->vdecsys_regmap = syscon_regmap_lookup_by_phandle_optional(pdev->dev.of_node,
> + "mediatek,vdecsys");
> +

It makes no sense to try to get a handle to this syscon if we're on the older
layout with vdecsys in the `reg` list: in that case, we can safely assume that
we don't have any mediatek,vdecsys syscon.

Cheers,
Angelo

\
 
 \ /
  Last update: 2023-06-20 10:06    [W:0.136 / U:0.672 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site