Messages in this thread | | | Date | Mon, 19 Jun 2023 14:17:58 +0200 | Subject | Re: [PATCH v3 1/3] dt-bindings: qspi: cdns,qspi-nor: Add clocks for StarFive JH7110 SoC | From | Krzysztof Kozlowski <> |
| |
On 19/06/2023 10:35, William Qiu wrote: > The QSPI controller needs three clock items to work properly on StarFive > JH7110 SoC, so there is need to change the maxItems's value to 3. Other > platforms do not have this constraint. > > Signed-off-by: William Qiu <william.qiu@starfivetech.com> > Reviewed-by: Hal Feng <hal.feng@starfivetech.com> > Reviewed-by: Conor Dooley <conor.dooley@microchip.com> > --- > .../bindings/spi/cdns,qspi-nor.yaml | 20 ++++++++++++++++++- > 1 file changed, 19 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml > index b310069762dd..1b83cbb9a086 100644 > --- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml > +++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml > @@ -26,6 +26,15 @@ allOf: > const: starfive,jh7110-qspi > then: > properties: > + clocks: > + maxItems: 3 > + > + clock-names: > + items: > + - const: ref > + - const: ahb > + - const: apb
You are duplicating top-level property. Define the items only in one place. If this list is applicable to everything, then in top-level property.
> + > resets: > minItems: 2 > maxItems: 3 > @@ -38,6 +47,9 @@ allOf: > > else: > properties: > + clocks: > + maxItems: 1
clock-names is missing. They must be in sync with clocks. What is the first clock?
> + > resets: > maxItems: 2 > > @@ -70,7 +82,13 @@ properties: > maxItems: 1 > > clocks: > - maxItems: 1 > + maxItems: 3
You did not test it before sending. minItems is missing.
> + > + clock-names: > + items: > + - const: ref > + - const: ahb > + - const: apb
> > cdns,fifo-depth: > description:
Best regards, Krzysztof
| |