Messages in this thread | | | Date | Mon, 12 Jun 2023 18:08:31 +0200 | From | Maxime Ripard <> | Subject | Re: [PATCH] clk: imx: composite-8m: Add imx8m_divider_determine_rate |
| |
On Sun, Jun 11, 2023 at 12:02:42PM -0500, Adam Ford wrote: > On Tue, Jun 6, 2023 at 1:45 PM Fabio Estevam <festevam@gmail.com> wrote: > > > > On Sat, May 6, 2023 at 4:53 PM Adam Ford <aford173@gmail.com> wrote: > > > > > > Currently, certain clocks are derrived as a divider from their > > > parent clock. For some clocks, even when CLK_SET_RATE_PARENT > > > is set, the parent clock is not properly set which can lead > > > to some relatively inaccurate clock values. > > > > > + Maxime > > > > Unlike imx/clk-composite-93 and imx/clk-divider-gate, it > > > cannot rely on calling a standard determine_rate function, > > > because the 8m composite clocks have a pre-divider and > > > post-divider. Because of this, a custom determine_rate > > > function is necessary to determine the maximum clock > > > division which is equivalent to pre-divider * the > > > post-divider. > > > > > > With this added, the system can attempt to adjust the parent rate > > > when the proper flags are set which can lead to a more precise clock > > > value. > > > > > > On the imx8mplus, no clock changes are present. > > > On the Mini and Nano, this can help achieve more accurate > > > lcdif clocks. When trying to get a pixel clock of 31.500MHz > > > on an imx8m Nano, the clocks divided the 594MHz down, but > > > left the parent rate untouched which caused a calulation error. > > > > > > Before: > > > video_pll 594000000 > > > video_pll_bypass 594000000 > > > video_pll_out 594000000 > > > disp_pixel 31263158 > > > disp_pixel_clk 31263158 > > > > > > Variance = -236842 Hz > > > > > > After this patch: > > > video_pll 31500000 > > > video_pll_bypass 31500000 > > > video_pll_out 31500000 > > > disp_pixel 31500000 > > > disp_pixel_clk 31500000 > > > > > > Variance = 0 Hz > > > > > > All other clocks rates and parent were the same. > > > Similar results on imx8mm were found. > > > > > > Fixes: 690dccc4a0bf ("Revert "clk: imx: composite-8m: Add support to determine_rate"") > > > Signed-off-by: Adam Ford <aford173@gmail.com> > > > > Peng / Abel, > > Any suggestions on how we can move this forward? Looking at the > clk-composite-8m driver, imx8m_clk_composite_compute_dividers uses the > max values which is basically what my patch does. There was some > discussion about making determine_rate mandatory for muxes[1] and this > patch should help with this in addition to making it easier to sync > more video resolutions on the 8m Mini and Nano.
Those patches have been queued by Stephen for 6.6 :)
Maxime [unhandled content-type:application/pgp-signature] | |