lkml.org 
[lkml]   [2023]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 2/4] drm/msm/dsi: Fix compressed word count calculation
From


On 5/3/2023 1:26 AM, Dmitry Baryshkov wrote:
> On 03/05/2023 04:19, Jessica Zhang wrote:
>> Currently, word count is calculated using slice_count. This is incorrect
>> as downstream uses slice per packet, which is different from
>> slice_count.
>>
>> Slice count represents the number of soft slices per interface, and its
>> value will not always match that of slice per packet. For example, it is
>> possible to have cases where there are multiple soft slices per interface
>> but the panel specifies only one slice per packet.
>>
>> Thus, use the default value of one slice per packet and remove
>> slice_count
>> from the word count calculation.
>>
>> Fixes: bc6b6ff8135c ("drm/msm/dsi: Use DSC slice(s) packet size to
>> compute word count")
>> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
>> ---
>>   drivers/gpu/drm/msm/dsi/dsi_host.c | 9 ++++++++-
>>   1 file changed, 8 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c
>> b/drivers/gpu/drm/msm/dsi/dsi_host.c
>> index 35c69dbe5f6f..b0d448ffb078 100644
>> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
>> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
>> @@ -996,7 +996,14 @@ static void dsi_timing_setup(struct msm_dsi_host
>> *msm_host, bool is_bonded_dsi)
>>           if (!msm_host->dsc)
>>               wc = hdisplay * dsi_get_bpp(msm_host->format) / 8 + 1;
>>           else
>> -            wc = msm_host->dsc->slice_chunk_size *
>> msm_host->dsc->slice_count + 1;
>> +            /*
>> +             * When DSC is enabled, WC = slice_chunk_size *
>> slice_per_packet + 1.
>> +             * Currently, the driver only supports default value of
>> slice_per_packet = 1
>> +             *
>> +             * TODO: Expand drm_panel struct to hold slice_per_packet
>> info
>> +             *       and adjust DSC math to account for
>> slice_per_packet.
>
> slice_per_packet is not a part of the standard DSC, so I'm not sure how
> that can be implemented. And definitely we should not care about the
> drm_panel here. It should be either a part of drm_dsc_config, or
> mipi_dsi_device.
>

This is not correct.

It is part of the DSI standard (not DSC standard). Please refer to
Figure 40 "One Line Containing One Packet with Data from One or More
Compressed Slices" and Figure 41 "One Line Containing More than One
Compressed Pixel Stream Packet".

This has details about this. So I still stand by my point that this
should be in the drm_panel.

>> +             */
>> +            wc = msm_host->dsc->slice_chunk_size + 1;
>>           dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM0_CTRL,
>>               DSI_CMD_MDP_STREAM0_CTRL_WORD_COUNT(wc) |
>>
>

\
 
 \ /
  Last update: 2023-05-08 22:12    [W:0.135 / U:24.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site