lkml.org 
[lkml]   [2023]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 3/6] thermal/drivers/qcom/tsens-v0_1: Add support for MSM8226
On Mon, 8 May 2023 at 00:11, Matti Lehtimäki <matti.lehtimaki@gmail.com> wrote:
>
> On 7.5.2023 23.40, Dmitry Baryshkov wrote:
> > On 07/05/2023 23:12, Matti Lehtimäki wrote:
> >> The MSM8226 TSENS IP has 6 thermal sensors in a TSENS v0.1 block.
> >> The thermal sensors use non-standard slope values.
> >
> > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> >
> > Note, the driver from 3.10 also provides custom data for non-calibrated mode. We can either ignore that (in the hope that all devices leaving the factory are calibrated), or fix it in the manner close to 8x74.
>
> That is true, 3.10 kernel does support non-calibrated mode. I can add support for that in a new version if that is wanted.

If there are no other comments, I'd suggest sending that as a follow
up (if sending it at all). The tsens driver provides some default
values for non-calibrated mode, so it is a minor issue.

--
With best wishes
Dmitry

\
 
 \ /
  Last update: 2023-05-08 00:50    [W:0.934 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site