lkml.org 
[lkml]   [2023]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 1/6] arm64: dts: qcom: sm8350: add ports subnodes in usb1 qmpphy node
From
On 04/05/2023 14:57, Neil Armstrong wrote:
> On 04/05/2023 09:38, Konrad Dybcio wrote:
>>
>>
>> On 3.05.2023 15:10, Neil Armstrong wrote:
>>> Add the USB3+DP Combo QMP PHY port subnodes in the SM8350 SoC DTSI
>>> to avoid duplication in the devices DTs.
>>>
>>> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
>>> ---
>>>   arch/arm64/boot/dts/qcom/sm8350.dtsi | 26 ++++++++++++++++++++++++++
>>>   1 file changed, 26 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
>>> index ebcb481571c2..d048f4d35c89 100644
>>> --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
>>> @@ -2149,6 +2149,32 @@ usb_1_qmpphy: phy@88e9000 {
>>>               #phy-cells = <1>;
>>>               status = "disabled";
>>> +
>>> +            ports {
>>> +                #address-cells = <1>;
>>> +                #size-cells = <0>;
>>> +
>>> +                port@0 {
>>> +                    reg = <0>;
>>> +
>>> +                    usb_1_qmpphy_out: endpoint {
>>> +                    };
>>> +                };
>>> +
>>> +                port@1 {
>>> +                    #address-cells = <1>;
>>> +                    #size-cells = <0>;
>>> +                    reg = <1>;
>>> +
>>> +                    usb_1_qmpphy_usb_ss_in: endpoint@0 {
>>> +                        reg = <0>;
>>> +                    };
>>> +
>>> +                    usb_1_qmpphy_dp_in: endpoint@1 {
>>> +                        reg = <1>;
>>> +                    };
>> Shouldn't dp be a separate port@2?
>
> Probably yes, but it should be the same issue for makena, but on makena
> we do not describe the USB SS and HS links separately, but only a single
> port for QMP input has been defined in the bindings.

Forget my comment, there's the 2 ports in the bindings, I was confused
after the bindings reviews...

Neil

>
> Neil
>
>>
>> Konrad
>>> +                };
>>> +            };
>>>           };
>>>           usb_2_qmpphy: phy-wrapper@88eb000 {
>>>
>

\
 
 \ /
  Last update: 2023-05-04 17:40    [W:0.058 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site