lkml.org 
[lkml]   [2023]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/6] thermal/drivers/mediatek/lvts_thermal: Handle IRQ on all controllers
Date
There is a single IRQ handler for each LVTS thermal domain, and it is
supposed to check each of its underlying controllers for the origin of
the interrupt and clear its status. However due to a typo, only the
first controller was ever being handled, which resulted in the interrupt
never being cleared when it happened on the other controllers. Add the
missing index so interrupts are handled for all controllers.

Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>

---

(no changes since v1)

drivers/thermal/mediatek/lvts_thermal.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index 3df4989f9902..2988f201633a 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -450,7 +450,7 @@ static irqreturn_t lvts_irq_handler(int irq, void *data)

for (i = 0; i < lvts_td->num_lvts_ctrl; i++) {

- aux = lvts_ctrl_irq_handler(lvts_td->lvts_ctrl);
+ aux = lvts_ctrl_irq_handler(&lvts_td->lvts_ctrl[i]);
if (aux != IRQ_HANDLED)
continue;

--
2.40.1
\
 
 \ /
  Last update: 2023-05-04 02:50    [W:0.065 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site