Messages in this thread | | | Date | Wed, 3 May 2023 17:08:22 -0400 | From | Brian Masney <> | Subject | Re: [PATCH v6 0/2] Add EMAC3 support for sa8540p-ride (devicetree bits) |
| |
On Mon, May 01, 2023 at 03:51:03PM -0500, Andrew Halaney wrote: > This is a forward port / upstream refactor of code delivered > downstream by Qualcomm over at [0] to enable the DWMAC5 based > implementation called EMAC3 on the sa8540p-ride dev board. > > >From what I can tell with the board schematic in hand, > as well as the code delivered, the main changes needed are: > > 1. A new address space layout for dwmac5/EMAC3 MTL/DMA regs > 2. A new programming sequence required for the EMAC3 base platforms > > This series addresses the devicetree changes to support this > hardware bringup. > > As requested[1], it has been split up by compile deps / maintainer tree. > The associated v4 of the netdev specific changes can be found at [2], > and is merged. > > The clock patch from this series was picked up from v5, leaving just the > devicetree bits here. > > Together, they result in the ethernet controller working for > both controllers on this platform.
Reviewed-by: Brian Masney <bmasney@redhat.com>
| |